Driftwood Lye Industrial

Numéro d'article:

  • Creates unique solutions
  • Offers a countless number of exciting colour options
  • Can be applied manually or with spray or spongeroller

10 L

Détails du produit

  • La description
  • Caractéristiques
  • Fiche technique
  • Fiche de données de sécurité

COV:

10 g/l, teneur maximale en COV (A/g (PA)): 30 g/l.

Densité:

0.95-1.00 g/ml.

Valeur du pH :

pH 13-14

durée de conservation:

3 années

Consommation:

25-40 m²/L

Couleurs:

Blanc

Stockage:

+10-25°C. Tenir hors de portée des enfants. Ne pas exposer à la chaleur (par ex. au soleil). A conservez à l’abri du gel en hiver et au frais en été.

Emballage:

10 L

Odeur:

Faible

WOCA Driftwood Lye is a pre-treatment product designed to create an aged patina look with countless variations. The tannin content in the wood highly influences the look, which means that the final result is 100 % unique. WOCA Driftwood Lye can be used in combination with lacquer, UV- and oxidizing oils.

Étapes de travail

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply the product 30-35 gr/m2
  • Or use spraymachine
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or use stacking on racks
Stacking
  • 3-4 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 240-320
  • After sanding apply a WOCA Treat product