Industrial Oil 1505 Hardwax

Numéro d'article:

Industrial oxidizing oil for wooden floors and furniture that combines oil and wax

  • Easy and flexible handling in production 
  • Extreme protection of the wood 
  • Factory-finished floors and furniture, ready for installation 
  • No additional on-site surface treatment is required 
  • Available in customized colours 

10 L
20 L

Détails du produit

  • La description
  • Caractéristiques
  • Fiche technique
  • Fiche de données de sécurité

COV:

470 g/l, teneur maximale en COV (A/i (PS)): 500 g/l.

Densité:

0.95-1.00 g/ml.

durée de conservation:

3 années

Consommation:

30-40 m²/L

Couleurs:

Naturel, Blanc 10%, Antique, Blanc 3%, Noir

Stockage:

+10-25°C. Tenir hors de portée des enfants. Ne pas exposer à la chaleur (par ex. au soleil). A conservez à l’abri du gel en hiver et au frais en été.

Emballage:

10 L, 20 L

Viscosité:

70-75 Sec. DIN Cup 4

Teneur en matière sèche:

50-55%

Durcissement complet:

7 jours à 20°C

Industrial Hardwax Oil 1505 is a high-performance and fast air-drying wood finish based on natural vegetable oils with high penetration. The hardwax oil is extremely suitable for production of beautiful, durable and smooth “factory-finished” floor solutions offering strong and long-lasting protection combined with an effective and flexible application process on the roller coater.

Étapes de travail

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 natural rubber or nitrile rubber
  • Apply 20-25 gr/m2
  • Or manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove by cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or use stacking on racks
Stacking
  • 4-6 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Apply 5 gr/m2
  • Apply 5-10 gr/m2
  • Or manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove excess oil by cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or use stacking on racks
Stacking
  • 12 h by 20 °C before packing
Viscosity correction: Correction can be made with WOCA Solvent only, #328575I.