Invisible Oil

Varenummer:

Wood floor oil with a neutral look

  • Gives the floor an untreated appearance
  • Resistant to liquids such as water, coffee, tea and red wine
  • Gives the wood a beautiful, breathable 'soft feel' surface 
  • Indoor climate certified

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

FIBA Approved Equipment

This approval applies specifically to flooring coatings and maintenance products, certified under contract number M169-2024.

Level 1 Equipment

This designation refers to equipment certified for use in:

  • FIBA National Team and Club Competitions
  • Elite-level national and international club and national team competitions

These competitions represent the highest levels of basketball worldwide. National governing bodies may impose additional rules for their own club competitions, but the equipment must still conform to FIBA's Level 1 standards.

Regulatory Guidelines

  • FIBA National Team and Club Competitions are governed by Book 2 of the FIBA Internal Regulations, which provide detailed rules for FIBA-sanctioned competitions.
  • All equipment used in these competitions must be FIBA Approved at Level 1. The equipment may display the FIBA Approved Equipment logo and must follow FIBA's guidelines regarding logo usage and references to FIBA approval.

Compliance

To ensure consistency and safety, any flooring coatings and maintenance products used in elite basketball competitions must meet FIBA's strict standards. These standards guarantee high-quality playing surfaces, vital for the performance and safety of athletes at top-level competitions.

*The wood sample is shown on oak
25 ML
2.5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

90 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colours:

Natural

Cleaning of tools:

Use warm water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

2.5 L

Viscosity:

50-55 Sec. DIN Cup 4

Dilution:

Undiluted

Odour:

Faint

Solid content:

30-40%

Drying time:

24 hours at 20°C

Fully hard:

7 days at 20°C

Invisible Oil is a water-based, low-odor, single-component oil of the highest quality. Combined with WOCA Invisible Oil Primer, it provides wood with a matte, natural appearance and strong, water-repellent protection that is easy to maintain. Ideal for machine oiling of light wood types and as the second phase of WOCA’s premium water-based oil system.

Worksteps

Instructions
Products in use
It is important that the product, the room and the floor are at a temperature between 15 °C and 30 °C and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. The wood should be primed with Invisible Oil Primer and then sanded with a bordeaux sanding pad or a lacquer sanding pad. Thoroughly vacuum clean the surface afterwards.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Thoroughly shake the container of Invisible Oil, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.
  2. Apply Invisible Oil using a short-bristled paint roller in an even coat. Work in small areas of no more than 20 m² at a time.
  3. Leave the oil to be absorbed for 5 minutes. If the oil soaks quickly into the wood, apply more oil.
  4. Rub the oil into the wood until the floor appears saturated. Use a buffing machine with a beige or bordeaux pad. Regularly change the buffing pad to prevent the oil from lumping.
  5. Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
  6. The surface can be used with caution after 24 hours and is fully hardened after 1 week at room temperature.
After 24 hours, the surface must be treated with Invisible Oil Care to improve the floor’s resistance to stains and wear. For optimal cleaning, we recommend WOCA Natural Soap Extra White, which cares for and maintains the surface. Do not expose the floor to water or other liquids for the first 7 days, while the oil is hardening.

Products you need

  • Invisible Oil Primer
    Invisible Oil Primer

    Primer for Invisible Oil

  • Invisible Oil Care
    Maintain
    Invisible Oil Care

    Top coat and care for Invisible Oil

  • Finish Sanding SPP 16
    Finish Sanding SPP 16"

    Maroon coloured floor polishing pad

Related products

View in same category

Intensive Wood Cleaner

Treatment preparation

Paint Roller Cylinder, 4 mm

For water and solventbased oils

Telescope Stick

For optimum reach

Paint Roller Holder

For applying oils and lacquers