Diamond Oil Active

Varenummer:

Oiling of wooden surfaces

  • 1-component oil with the performance of a 2-component oil
  • VOC-Free
  • Extreme durability and resistance to scratches and marks
  • High resistance to liquids such as water, coffee, tea, and red wine.

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

FIBA Approved Equipment

This approval applies specifically to flooring coatings and maintenance products, certified under contract number M169-2024.

Level 1 Equipment

This designation refers to equipment certified for use in:

  • FIBA National Team and Club Competitions
  • Elite-level national and international club and national team competitions

These competitions represent the highest levels of basketball worldwide. National governing bodies may impose additional rules for their own club competitions, but the equipment must still conform to FIBA's Level 1 standards.

Regulatory Guidelines

  • FIBA National Team and Club Competitions are governed by Book 2 of the FIBA Internal Regulations, which provide detailed rules for FIBA-sanctioned competitions.
  • All equipment used in these competitions must be FIBA Approved at Level 1. The equipment may display the FIBA Approved Equipment logo and must follow FIBA's guidelines regarding logo usage and references to FIBA approval.

Compliance

To ensure consistency and safety, any flooring coatings and maintenance products used in elite basketball competitions must meet FIBA's strict standards. These standards guarantee high-quality playing surfaces, vital for the performance and safety of athletes at top-level competitions.

*The wood sample is shown on oak
0.845 FL.OZ.
169.070 FL.OZ.
25.361 FL.OZ.
3.381 FL.OZ.
33.814 FL.OZ.
8.454 FL.OZ
84.535 FL.OZ.
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

10 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.95-1.00 g/ml.

Shelf life:

3 years

Application Temperature:

+59-86°F and approx. 50% air humidity.

Coverage:

215-270 sq.ft./L

Colours:

Natural

Cleaning of tools:

Use WOCA Solvent or turpentine

Storage:

+50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

25.361 FL.OZ.

Non-slip (DIN 51130):

R10

Viscosity:

40-45 Sec. DIN Cup 4

Dilution:

WOCA Solvent (does not normally need to be diluted).

Odour:

Faint

Solid content:

95-100%

Drying time:

24 hours at 68°F

Between coats:

8-10 hours at 68°F

Light use:

24 hours at 68°F

Recommendation:

Avoid exposing the floor to water or cleaning it during the first 7 days while the oil cures. After this period, clean the floor with WOCA Natural Soap to provide additional surface protection.

Fully hard:

5 days at 68°F

Diamond Oil Active is a sustainable, VOC-free oil for wooden floors, tabletops, and furniture. This premium, single-component, low-odor oil is durable, easy to apply, and minimizes waste. Its hyper cross-linking technology creates a water-repellent, non-slip surface that’s easy to clean and maintain. With a dry matter content of approx. 99%, it’s ideal for machine application on untreated or sanded wood of any type.

Worksteps

Instructions
Products in use
Ensure that the product, room, and floor are at a temperature of 15°C to 30°C, with air humidity around 50%. The wood's moisture content must not exceed 12%. Maintain good ventilation in the room for optimal evaporation and drying. The wood surface must be clean, free from dirt, grease, wax, and sanding residue. Previously treated surfaces should be sanded down to bare wood using grit 100-120 and vacuumed thoroughly. Clean the surface with WOCA Intensive Wood Cleaner and allow it to dry for at least 8 hours before applying the oil.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Wash the floor with Intensive Wood Cleaner. Leave the floor to dry for at least 24 hours at 68°F before applying the oil.
  2. Thoroughly shake the container of Diamond Oil Active , both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch. Apply the oil using a short-bristled paint roller in an even coat.
  3. Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
  4. Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a buffing machine for large areas and a polishing cloth/pad manually for small areas.
  5. Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
  6. If an extra-attractive finish and resistance is desired, the floor can be repolished with 3.38 fl. oz Diamond Oil Active per 110 sq.ft./L within 8-10 hours hours of the first application. The oil should be polished thoroughly, as described in 4+5.
  7. The floor can be used with caution after 24 hours.
  8. Clean tools with WOCA Solvent or Turpentine.
For an enhanced finish and increased durability, the floor can be repolished with 1 dl of Diamond Oil Active per 10 m² within 8-10 hours of the initial application. Ensure the oil is thoroughly polished following the same procedure as before.

Products you need

    Related products

    View in same category

    Telescope Stick

    For optimum reach