Tannin Spot Remover

Varenummer:

Neutralises discolouration

  • Removes black watermarks from wood
  • Ready mixed - Easy to use
  • Neutralises tannin
  • Water Based
  • for indoor and outdoor use

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

FIBA Approved Equipment

This approval applies specifically to flooring coatings and maintenance products, certified under contract number M169-2024.

Level 1 Equipment

This designation refers to equipment certified for use in:

  • FIBA National Team and Club Competitions
  • Elite-level national and international club and national team competitions

These competitions represent the highest levels of basketball worldwide. National governing bodies may impose additional rules for their own club competitions, but the equipment must still conform to FIBA's Level 1 standards.

Regulatory Guidelines

  • FIBA National Team and Club Competitions are governed by Book 2 of the FIBA Internal Regulations, which provide detailed rules for FIBA-sanctioned competitions.
  • All equipment used in these competitions must be FIBA Approved at Level 1. The equipment may display the FIBA Approved Equipment logo and must follow FIBA's guidelines regarding logo usage and references to FIBA approval.

Compliance

To ensure consistency and safety, any flooring coatings and maintenance products used in elite basketball competitions must meet FIBA's strict standards. These standards guarantee high-quality playing surfaces, vital for the performance and safety of athletes at top-level competitions.

*The wood sample is shown on oak
250 ML
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

less than 5%: BENZISOTHIAZOLINONE, 2-BROMO-2-NITROPROPANE-1,3-DIOL.

Density:

0.95-1.00 g/ml.

pH-value:

pH 2-3

Shelf life:

2 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Colours:

Colourless

Cleaning of tools:

Use water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

250 ML

Odour:

Odourless

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

30-60 minutes at 20°C

Tannin Spot Remover effectively removes black spots caused by tannin/water reaction on interior wood surfaces without any harsh or bleaching chemicals.

Worksteps

Instructions
Products in use
Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Spray Tannin Spot Remover evenly on the stain directly from the bottle.
  2. Leave the Tannin Spot Remover to dissolve the stain for 30-60 minutes.
  3. Wipe with cloth wrung in luke-warm water.
  4. Repeat operation if necessary.
  5. When the floor is completely dry, apply the original surface finish, e.g. oil, wax or soap, to re-establish the protection of the surface.

Products you need

  • Master Colour Oil
    Master Colour Oil

    Oiling of wooden floors

  • Diamond Oil Active
    Treat
    Diamond Oil Active

    Oiling of wooden surfaces

  • Hardwax Oil Extreme
    Hardwax Oil Extreme

    Oiling and waxing of wooden floors

Related products

View in same category

Natural Soap

Cleaning and protection of oiled wood

Hardwax Oil Swift

Oiling and waxing of wooden floors

Intensive Wood Cleaner, Spray – Colourless, 750 ML