Master Multi Primer

Varenummer:

Solvent-based primer. Improves adhesion of lacquer

  • Especially suited for exotic and old wooden floors
  • Quick-drying
  • Minimizes side-bonding
  • Hightlights the floor

*The wood sample is shown on oak

5 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Toluene, ethyl acetate and n-butyl acetate.

VOC:

735 g/l, maximum VOC content (A/h (SB)): 750 g/l.

Density:

0.80-0.85 g/ml.

Shelf life:

1 year

Coverage:

8-10 m²/L

Colours:

Colourless - Silk-matt

Cleaning of tools:

Use WOCA Solvent

Storage:

+5-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

5 L

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

30-60 minutes at 20°C

Master Multi Primer is a solvent-based, fast-drying and wood primer, which will seal the wood and improve the adhesion of a subsequent coat of lacquer. The primer is especially suitable as a problem-solving primer on old and previously treated floors, as well as a primer for exotic, oily wood varieties.

Worksteps

Instructions
Products in use
It is important that both wood and primer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. The floor must be completely dry before Master Multi Primer is applied.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply undiluted Master Multi Primer with a short-bristle roller (6 mm), using light movements lengthways along the wood.
  3. Let the surface dry for 30-60 minutes before subsequent treatment.
  4. The floor can then be finished with one of WOCA’s lacquers, following the instructions for the lacquer you have chosen. This product is not suitable for use with .
It may be necessary to apply an extra coat of Master Multi Primer on surfaces made of exotic wood or fruitwood.