Master Filler Classic

Item No.: 740558A

Solvent-based gap filler for wooden floors

Quick-drying
Easy to sand
Elastic consistency

Colours

*The wood sample is shown on oak

Natural

Packaging

Certifications

Product Details

Master Filler Classic is a fast-drying solvent-based gap filler for joins and gaps in wooden floors, such as brick and herringbone pattern parquet. It is easy to work with and shortens the work process due to its fast drying time.

If eye irritation persists:
Get medical attention.
Wear eye/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Highly flammable liquid and vapour.
Causes serious eye irritation.
May cause drowsiness or dizziness.
Danger!

VOC:

745 g/l, maximum VOC content (A/h (SB)): 750 g/l.

Shelf life:

1 year

Application Temperature:

10-25

Coverage:

8-10 m²/L

Colour product:

Natural

Packaging sizes:

5 L

The surface must be completely clean, dry and free of dust, wax, grease, polish, etc. Remove grime and irregularities using a sanding machine. Use grit 60-80 sandpaper for the final sanding before application of Master Filler Classic.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Shake the container well before use.

Mix the Master Filler Classic and the sanding residue into a nice and soft paste. The structure of the filler can be adjusted using the fine or coarse sanding residue. We recommend the use of sanding residue .

Distribute the filler evenly, using a stainless steel applicator. Repeat if necessary.

Sand the surface with 100-120 sandpaper once the surface is dry.

The surface can then be lacquered using one of WOCA’s lacquers, following the product instructions.

Products you need