Master Multi Primer

Item No.: 690150A

Solvent-based primer. Improves adhesion of lacquer

Especially suited for exotic and old wooden floors
Quick-drying
Minimizes side-bonding
Hightlights the floor

Colours

*The wood sample is shown on oak

Colourless – Silk-matt

Packing

Certifications

Product Details

Master Multi Primer is a solvent-based, fast-drying and wood primer, which will seal the wood and improve the adhesion of a subsequent coat of lacquer. The primer is especially suitable as a problem-solving primer on old and previously treated floors, as well as a primer for exotic, oily wood varieties.

Get medical attention.
Wear eye/face protection.
If eye irritation persists:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Causes serious eye irritation.
Danger!
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Highly flammable liquid and vapour.

Declaration:

Toluene, ethyl acetate and n-butyl acetate.

VOC:

735 g/l, maximum VOC content (A/h (SB)): 750 g/l.

Density:

0.80-0.85 g/ml.

Shelf life:

1 year

Application Temperature:

10-25

Coverage:

8-10 m²/L

Colour:

Colourless – Silk-matt

Packaging:

5 L

It is important that both wood and primer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. The floor must be completely dry before Master Multi Primer is applied.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Shake the container well before use.

Apply undiluted with a short-bristle roller (6 mm), using light movements lengthways along the wood.

Let the surface dry for before subsequent treatment.

The floor can then be finished with one of WOCA’s lacquers, following the instructions for the lacquer you have chosen. This product is not suitable for use with .

It may be necessary to apply an extra coat of Master Multi Primer on surfaces made of exotic wood or fruitwood.

Products you need