Maintenance Gel

Item No.: 527802A 528302A

Revitalises oil-treated wood

Suitable for all types of oiled surfaces
Safe for Food Contact*
Makes surfaces even more durable
Simple application both manually and by machine
Excellent results on factory-oiled/hardwax oil surfaces

Colours

*The wood sample is shown on oak

Natural

Packaging

Certifications

Product Details

Maintenance Gel is for the care and maintenance of oiled indoor wooden surfaces and floors. The oil is quick-drying and leaves an attractive, water and dirt-repellent surface. Maintenance Gel is suitable for furniture, kitchen work surfaces, floors and other indoor wooden surfaces. It can also be used for improved results on factory-oiled/UV-oiled surfaces.

VOC:

120 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

Regular maintenance: 20-30 m²/200 ml. Newly-sanded/non-maintained wood: 4-6 m²/200 ml.

Colour product:

Natural

Packaging sizes:

200 ml

VOC:

115 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

Regular maintenance: 20-30 m²/200 ml. Newly-sanded/non-maintained wood: 4-6 m²/200 ml.

Colour product:

Extra White

Thoroughly clean the surface with WOCA Intensive Wood Cleaner. In case of grain raising, an advantage would be slightly to de-nib with fine sand paper (grit 180) or sanding pad (remove any sanding dust from the surface).

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours

Sand the surface with 180 and vacuum clean the surface thoroughly.

Apply an appropriate amount of gel to a Hand Scrubber Flex Kit White and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas (floors larger than 4 m²) it would be advantageous to use a polishing machine.

Immediately wipe down the polished surface with a clean, dry lint-free cotton cloth. When prepping with a machine, the final polishing should be done with a cotton cloth beneath the buffer. The surface should not appear wet and no excess gel should remain on the surface.

If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.

Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days .

When used on UV-oiled surfaces, make sure to do a more thorough final polishing to remove all excess gel.

Products you need