Products
Interior
Maintenance Oil

Maintenance Oil

Item No.: 527307AA 527310SA 527311A 527325AA 527350AA 527407AA 527410SA 527411A 527425AA

Revitalises oil-treated wood

  • Makes oiled floors even more durable 
  • Highlights the glow and the grain structure of the wood 
  • Gives the wood a beautiful, breathable surface
  • Indoor climate certified
  • Easy to apply

Colours

*The wood sample is shown on oak

White
Natural

Packing

Certifications

Product Details

Maintenance Oil may be used for the maintenance of all oxidative oiled wood surfaces and is especially suitable for the regular maintenance of oiled wood floors. In addition to being very easy to use and assuring minimal product waste, the maintenance oil refreshes the natural, warm glow of the wood and increases resistance to stains and waste. Maintenance Oil is suitable for both manual and machine application to oiled floors.

  • IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting.
  • Store locked up.
  • Danger!
  • Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
  • Repeated exposure may cause skin dryness or cracking.
  • May be fatal if swallowed and enters airways.
  • IF SWALLOWED:
  • Immediately call a POISON CENTER or doctor.
  • The following applies only for colours that contains more than 1 % white pigment.
  • Do NOT induce vomiting.
VOC:
480 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
Natural
Packaging:
25 ML,750 ML,1 L,2.5 L,5 L
VOC:
480 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
Natural
Packaging:
25 ML,750 ML,1 L,2.5 L,5 L
VOC:
480 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
Natural
Packaging:
25 ML,750 ML,1 L,2.5 L,5 L
VOC:
480 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
Natural
Packaging:
25 ML,750 ML,1 L,2.5 L,5 L
VOC:
480 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
Natural
Packaging:
25 ML,750 ML,1 L,2.5 L,5 L
VOC:
465 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
White
Packaging:
25 ML,750 ML,1 L,2.5 L
VOC:
465 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
White
Packaging:
25 ML,750 ML,1 L,2.5 L
VOC:
465 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
White
Packaging:
25 ML,750 ML,1 L,2.5 L
VOC:
465 g/l, maximum VOC content (A/f (SB)): 700 g/l.
Density:
0.85-0.90 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
30-40 m²/L
Colour:
White
Packaging:
25 ML,750 ML,1 L,2.5 L

Product, room and floor temperature should be between 15-35°C. Ensure good ventilation at all times during the application and drying time.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  • Clean the floor with Intensive Wood Cleaner mixed into water. Leave the floor to dry for at least . The floor must be completely dry.
  • Shake the container well before use.
  • Apply approx. of per floor using a pad, short-bristled paint roller (3-4 mm) or a polishing machine with a white or beige pad on slightly larger areas.
  • It is important that is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.
  • Wipe down the floor with clean, dry cotton cloths before proceeding with the next section of floor to be finished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.
  • Continue stepwise till the floor has been finished.
  • When polished with polishing machine the floor will be pre-hardened after and may cautiously be taken into use. Manually polished floors may be taken into use after . Do not expose the floor to water during hardening time of .
  • Do not clean the floor or expose it to water during the first 3 days, while the oil is curing.

    ERROR: ORA-00907: missing right parenthesis