Driftwood Lye

Item No.: 500278A 500278SA 500279A 500279SA

Gives oak a weather-beaten patina

Gives oak a weather-beaten patina
Creates unique colour solutions
Water-based
Reacts with tannin in the wood – suitable for oak wood

Colours

*The wood sample is shown on oak

Grey

White

Packing

Certifications

Product Details

Driftwood Lye is a unique, water-based product, which gives the wood a weather-beaten patina. The product is primarily for oak wood. By using this product, the wood will get a very nice two-dimensional design. Finally, the surface must be treated with one of the WOCA oils.

IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting.
Immediately call a POISON CENTER or doctor.
Causes severe skin burns and eye damage.
Danger!
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water (or shower).

VOC:

10 g/l, maximum VOC content (A/g (WB)): 30 g/l.

Density:

1.10-1.20 g/ml.

Coverage:

pH 13-14

Shelf life:

2 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

White

Packaging:

100 ML,2.5 L

VOC:

10 g/l, maximum VOC content (A/g (WB)): 30 g/l.

Density:

1.10-1.20 g/ml.

Coverage:

pH 13-14

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

White

Packaging:

100 ML,2.5 L

VOC:

10 g/l, maximum VOC content (A/g (WB)): 30 g/l.

Density:

1.10-1.20 g/ml.

Coverage:

pH 13-14

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Grey

Packaging:

100 ML,2.5 L

VOC:

10 g/l, maximum VOC content (A/g (WB)): 30 g/l.

Density:

1.10-1.20 g/ml.

Coverage:

pH 13-14

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Grey

Packaging:

100 ML,2.5 L

The unfinished woodwork must be clean, dry and finely sanded (grit 100-120) before applying the lye.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Shake the container well and pour the Lye into a plastic bucket. It is important that no pigments are left in the container. Stir regularly during the application to prevent the pigments from settling to the bottom.

Apply an even coat of the lye with the WOCA Applicator, a nylon brush or roller lengthwise along the grain. Apply at least 1 L of lye per 8-10 m²/L of wood. Leave wood to dry for approx. 6-12 hours at 20°C.

De-nib standing fibres and remove excess pigments with a medium e.g. green or bordeaux, sanding polishing pad. Remove the sanding dust with a vacuum cleaner.

Finish the wood surface with a WOCA oil.

Products you need