Products
Interior
Diamond Oil Active

Diamond Oil Active

Item No.: 565010A 565010SA 565025A 565025SA 565050A 565105A 565107A 565110SA 565125A 565125SA 565505A 565507A 565510SA 565525A 565525SA 565607A 565610SA 565625A 565625SA 565707A 565710SA 565725A 565725SA 565807A 565810SA 565825A 565907A 565910SA 565925A 565925SA 566007A 566010SA 566025A 566025SA 566105A 566107A 566110SA 566125A 565005A 565007A

Oiling of wooden surfaces

  • 1-component oil with the performance of a 2-component oil
  • VOC-Free
  • Extreme durability and resistance to scratches and marks
  • High resistance to liquids such as water, coffee, tea, and red wine

Colours

*The wood sample is shown on oak

Natural
White
Extra White
Sand Grey
Smoke Brown
Caramel Brown
Carbon Black

Packaging

Certifications

Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ‘natural’ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Product Details

Diamond Oil Active is a sustainable, VOC-free oil for wooden floors, tabletops, and furniture. This premium, single-component, low-odor oil is durable, easy to apply, and minimizes waste. Its hyper cross-linking technology creates a water-repellent, non-slip surface that’s easy to clean and maintain. With a dry matter content of approx. 99%, it’s ideal for machine application on untreated or sanded wood of any type.

VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
Packaging sizes:
750 ml – 1 L – 2.5 L
VOC:
0 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
Packaging sizes:
750 ml – 1 L – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
VOC:
75 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
VOC:
10 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Extra White
VOC:
10 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Extra White
Packaging sizes:
750 ml – 2.5 L
VOC:
10 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Extra White
VOC:
10 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Extra White
Packaging sizes:
750 ml – 2.5 L
VOC:
10 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Extra White
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
White
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
White
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
White
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
White
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
White
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Concrete Grey
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Concrete Grey
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Concrete Grey
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Concrete Grey
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Sand Grey
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Sand Grey
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Sand Grey
Packaging sizes:
2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Sand Grey
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Carbon Black
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Carbon Black
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Carbon Black
Packaging sizes:
2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Chocolate Brown
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Chocolate Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Chocolate Brown
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Chocolate Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Caramel Brown
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Caramel Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Caramel Brown
Packaging sizes:
2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Caramel Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Smoke Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Smoke Brown
Packaging sizes:
750 ml – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Smoke Brown
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Smoke Brown
Packaging sizes:
2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
Packaging sizes:
250 ml – 750 ml – 1 L – 2.5 L
VOC:
8 g/l, maximum VOC content (A/i (SB)): 500 g/l.
Density:
0.95-1.00 g/ml.
Shelf life:
3 years
Application Temperature:
+15-30°C and approx. 50% air humidity.
Coverage:
20-25 m²/L
Colour product:
Natural
Packaging sizes:
750 ml – 1 L – 2.5 L

The wood must be newly-sanded with grit 100-120 for the final sanding. Product, room and floor temperature must be between 15-30°C. Ensure good ventilation when applying the oil and when it is drying.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  • Wash the floor with Intensive Wood Cleaner. Leave the floor to dry for at least 24 hours at 20°C before applying the oil.
  • Thoroughly shake the container of Diamond Oil Active , both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch. Apply the oil using a short-bristled paint roller in an even coat.
  • Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
  • Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a buffing machine for large areas and a polishing cloth/pad manually for small areas.
  • Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
  • If an extra-attractive finish and resistance is desired, the floor can be repolished with 1 dl Diamond Oil Active per 10 m² within 8-10 hours hours of the first application. The oil should be polished thoroughly, as described in 4+5.
  • The floor can be used with caution after 24 hours.
  • Clean tools with WOCA Solvent or Turpentine.
  • For an enhanced finish and increased durability, the floor can be repolished with 1 dl of Diamond Oil Active per 10 m² within 8-10 hours of the initial application. Ensure the oil is thoroughly polished following the same procedure as before.

    ERROR: ORA-00907: missing right parenthesis