Diamond Oil Active
Diamond Oil Active

Diamond Oil Active

Artikel nr.: 565010A 565010SA 565025A 565025SA 565050A 565105A 565107A 565110SA 565125A 565125SA 565505A 565507A 565510SA 565525A 565525SA 565607A 565610SA 565625A 565625SA 565707A 565710SA 565725A 565725SA 565807A 565810SA 565825A 565907A 565910SA 565925A 565925SA 566007A 566010SA 566025A 566025SA 566105A 566107A 566110SA 566125A 565005A 565007A

Fußbodenöl für geöltes Holz

  • 1-Komponenten-Öl mit der Leistung eines 2-Komponenten-Öl
  • VOC Frei
  • Extreme Haltbarkeit und wiederstandsfähig gegen Kartzer und Flecken
  • Beständig gegen Flüssigkeiten wie Wasser, Kaffee, Tee und Rotwein

Farben

*Das Holzmuster ist auf Eiche abgebildet

Natur
Weiß
Extra Weiß
Sand Grau
Braun geräuchert
Caramel Braun
Carbon Schwarz

Verpackung

Zertifizierungen

Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Bio-Based ASTM 6866
Biobased Carbon Content ASTM D6866-22 is an international standard method utilized for product testing. The result is reported as % Biobased Carbon. This indicates the percentage carbon from ’natural‘ (plant or animal by-product) sources.
DiBt
DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.
DIN EN 16165 - Anti Slip R10
DIN EN 16165 is the European standard for determining slip resistance on floor surfaces with a classification from R9 to R13. The Anti Slip test is used to ensure safe traffic for all types of floors in public areas and workplaces etc.
Fire test
European standard specifying how building materials react in case of fire. Bfl-s1 classifies flooring with low combustibility and very low smoke development.
EN 71-3
European standard ensuring that materials do not release toxic substances in amounts harmful to children. Particularly relevant for materials such as toys, kitchen utensils, worktops and furniture.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Emicode EC1 Plus
The international premium class Emicode® EC1PLUS defines even stricter limit values for very low emissions from indoor installation materials for walls and floors. Products awarded this quality seal help ensure a clean indoor air climate by limiting harmful emissions, often to levels that are barely measurable.
Produktdetails

Diamond Oil Active ist ein nachhaltiges, VOC-freies Öl für Holzböden, Tischplatten und Möbel. Dieses hochwertige, einkomponentige, geruchsarme Öl ist langlebig, einfach anzuwenden und minimiert Abfall. Dank seiner Hyper-Crosslinking-Technologie entsteht eine wasserabweisende, rutschfeste Oberfläche, die leicht zu reinigen und zu pflegen ist. Mit einem Feststoffgehalt von ca. 99 % ist es ideal für die maschinelle Anwendung auf unbehandeltem oder geschliffenem Holz jeder Art.

VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
Verpackungsgrößen:
750 ml – 1 L – 2,5 L
VOC:
0 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
Verpackungsgrößen:
750 ml – 1 L – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
VOC:
75 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
VOC:
10 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Extra Weiß
VOC:
10 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Extra Weiß
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
10 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Extra Weiß
VOC:
10 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Extra Weiß
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
10 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Extra Weiß
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Weiß
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Weiß
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Weiß
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Weiß
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Weiß
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Betongrau
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Betongrau
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Betongrau
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Betongrau
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Sand Grau
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Sand Grau
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Sand Grau
Verpackungsgrößen:
2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Sand Grau
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Carbon Schwarz
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Carbon Schwarz
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Carbon Schwarz
Verpackungsgrößen:
2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Schokobraun
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Schokobraun
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Schokobraun
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Schokobraun
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Caramel Braun
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Caramel Braun
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Caramel Braun
Verpackungsgrößen:
2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Caramel Braun
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Braun geräuchert
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Braun geräuchert
Verpackungsgrößen:
750 ml – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Braun geräuchert
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Braun geräuchert
Verpackungsgrößen:
2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
Verpackungsgrößen:
250 ml – 750 ml – 1 L – 2,5 L
VOC:
8 g/l, Grenzwerte für den VOC-Höchstgehalt (A/i (Lb)): 500 g/l.
Dichte:
0.95-1.00 g/ml.
Haltbarkeit:
3 Jahre
Verarbeitungstemperatur:
+15-30°C bei ugf. 50% Luftfeuchte.
Ergiebigkeit:
20-25 m²/L
Colour product:
Natur
Verpackungsgrößen:
750 ml – 1 L – 2,5 L

Das Holz muss frisch geschliffen sein, zuletzt mit Sandpapier Korn 100-120. Produkt-, Raum- und Bodentemperatur sollten 15-30°C betragen. Beim Auftragen und während der Trocknungszeit gut lüften.

Wir empfehlen einen Probeanstrich an einer unauffälligen Stelle um das Ergebnis beurteilen zu können.

  • Den Boden mit Intensive Wood Cleaner abwaschen. Vor dem Ölen den Boden mindestens 24 Stunden bei 20°C trocknen lassen.
  • Schütteln Sie den Behälter mit Diamond Oil Active vor und während des Gebrauchs gründlich. Behälter mit unterschiedlichen Chargennummern sollten gemischt werden, um Farbunterschiede zu vermeiden. Tragen Sie das Öl mit einer kurzfloorigen Farbrolle in einer gleichmäßigen Schicht auf.
  • Mit Flächenstreicher oder Ölroller gleichmäßig satt auf 5-10 m2 Fläche auftragen und min. 10-15 Minuten einziehen lassen, Trockenstellen nachölen.
  • Das Öl ins Holz polieren, bis die Oberfläche gesättigt wirkt. Für größere Flächen eine Poliermaschine mit beigem Kissen und kleinere Flächen mit Poliertuch/Kissen von Hand polieren.
  • Überschüssiges Öl mit trockenen, fusselfreien Baumwolltüchern entfernen, bis die Oberfläche nicht mehr nass erscheint.
  • Für ein besonders gutes, Finish und hohe Widerstandsfähigkeit kann der Boden mit 1 dl Diamond Oil Active pro 10 m² innerhalb von 8-10 Stunden nach dem ersten Auftragen. Das Öl gründlich polieren, wie in Punkt 4+5 beschrieben.
  • Nach 24 Stunden kann der Boden vorsichtig betreten werden.
  • Werkzeug mit WOCA Solvent oder Terpentin reinigen.
  • Wird ein besonders attraktives Finish und eine noch höhere Widerstandsfähigkeit gewünscht, kann der Boden mit 1 dl Diamantöl Aktiv pro 10 m² innerhalb von 8-10 Stunden nach der ersten Anwendung nachpoliert werden. Das Öl sollte wie zuvor beschrieben gründlich poliert werden.

    ERROR: ORA-00907: missing right parenthesis