Neutral Lye

Item No.: 500239A

Priming and ligthning of wood before treatment

Provides a lighter finish
Reduces the yellowing process of wood
Suitable for any type of wood

Colours

*The wood sample is shown on oak

Extra White

Packing

Certifications

Product Details

Neutral Lye is used for lye priming of unfinished or newly sanded interior woodwork i.e. floor, stairs, furniture and panels. The priming prevents the wood from yellowing and enhances the wood grain creating a coloured wash effect, depending on the chosen colour. Neutral Lye may be used on all types of wood.

Contains : 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
Safety data sheet available on request.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

Declaration:

5% or over but less than 15%: coloring agents. less than 5%: BENZISOTHIAZOLINONE, 2-BROMO-2-NITROPROPANE-1,3-DIOL, Pyrithione sodium (INNM) (2), reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1).

VOC:

30 g/l, maximum VOC content (A/g (WB)): 30 g/l.

Density:

0.95-1.00 g/ml.

Coverage:

pH 7-8

Shelf life:

2 years

Coverage:

8-10 m²/L

Colour:

Extra White

Packaging:

5 L

Apply an even coat of the lye with the WOCA Applicator, a nylon brush or roller lengthwise along the grain. Apply at least 1 L of lye per 8-10 m²/L of wood. Leave wood to dry for approx. 8-10 hours at 20°C.

On vertically mounted woodwork, apply from top to bottom.

Clean tools with water and soap.

When woodwork is dry, remove any visible lime pigments from the surface. Possibly clean with or loosen with green or yellow pad under polishing machine and subsequently vacuum clean the floor.

Finish the wood surface with a WOCA oil, lacquer or soap.

Wear suitable protective clothing, gloves and eye/face protection. Stir thoroughly before use

Products you need