Cleaning Oil

Item number:

Cleaning and oiling in a single workflow

  • Cleaning and oiling in a single workflow
  • Easy application and quick-drying 
  • For high traffic areas 
  • Re-oils and protects the wood

*The wood sample is shown on oak

169.070 FL.OZ.

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

15 g/l. (max)

Density:

0.80-0.85 g/ml.

Shelf life:

3 years

Application Temperature:

+59-77°F and approx. 50% air humidity.

Coverage:

1,080 sq.ft./L

Colours:

Natural

Cleaning of tools:

Use WOCA Solvent or turpentine

Storage:

+50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

169.070 FL.OZ.

Viscosity:

10-15 Sec. DIN Cup 4

Odour:

Characteristic

Solid content:

10-20%

Mixing ratio:

Ready to use. Do not dilute.

Light use:

2-3 hours at 68°F

Recommendation:

Do not expose the floor to water or clean it for the first 24 hours, while the oil is hardening. After 24 hours the floor can be cleaned with WOCA Commercial Soap, which gives the surface extra protection.

Fully hard:

24 hours at 68°F

Cleaning Oil is for use in high trafficareas, where deep cleaning and oiling ofthe wood is required, in a single process. Theoil is quick drying and therefore ideal for buildingssuch as airports, railway stations andpublic areas where it is not possible to sealoff an area for an extended period of time.Cleaning Oil cleans and maintains the woodthoroughly, leaving a surface that is both water-repellent and maintained.

Worksteps

Instructions
Products in use
It is important that the product, the room and the floor are at a temperature between 59°F and 86°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. If the surface is very dirty and stained, we recommend cleaning with WOCA Intensive Wood Cleaner, diluted 1:20 using a buffing machine and green polishing pad before the first application of Cleaning Oil

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply approx. 3.38 fl. oz of Cleaning Oil US per 110 sq.ft./L. Apply the oil using a polishing machine and a green polishing pad. The oil should be polished well into the wood. Continue polishing until the wood seems saturated and the surface has an even, uniform appearance. The surface must not appear wet afterwards.
  3. The floor can be used after a drying time of . Do not clean the floor or expose it to water during the first 24 hours, while the oil is curing.
For regular cleaning, use WOCA Commercial Soap for example every 2 or 3 days. Follow dosage instructions on the label. The soap is suitable for use in floor washing machines. Commercial Oil should be applied 2-4 times a year, or as required.