High Solid Master Oil

Varenummer:

Oiling of wooden surfaces

  • Can be used on all wooden floors
  • Especially suitable for commercial areas
  • To be applied solely by machine
  • High solid content

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

A voluntary international environmental label, the quality seal represents very low VOC emissions, therefore granting the greatest possible protection for the indoor air climate.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

<p><strong><span lang="EN-US">FIBA Approved Equipment</span></strong></p><p><span lang="EN-US">This approval applies specifically to <strong>flooring coatings and maintenance products</strong>, certified under <strong>contract number M169-2024</strong>.</span></p><p><strong><span lang="EN-US">Level 1 Equipment</span></strong></p><p><span lang="EN-US">This designation refers to equipment certified for use in:</span></p><ul type="disc" style="margin-top:0cm;"><li data-list="1" data-level="1"><strong><span lang="EN-US">FIBA National Team and Club Competitions</span></strong></li><li data-list="1" data-level="1"><strong><span lang="EN-US">Elite-level national and international club and national team competitions</span></strong></li></ul><p><span lang="EN-US">These competitions represent the highest levels of basketball worldwide. National governing bodies may impose additional rules for their own club competitions, but the equipment must still conform to FIBA's Level 1 standards.</span></p><p><strong>Regulatory Guidelines</strong></p><ul type="disc" style="margin-top:0cm;"><li data-list="0" data-level="1"><strong><span lang="EN-US">FIBA National Team and Club Competitions</span></strong><span lang="EN-US"> are governed by <strong>Book 2 of the FIBA Internal Regulations</strong>, which provide detailed rules for FIBA-sanctioned competitions.</span></li><li data-list="0" data-level="1"><span lang="EN-US">All equipment used in these competitions must be <strong>FIBA Approved at Level 1</strong>. The equipment may display the <strong>FIBA Approved Equipment logo</strong> and must follow FIBA's guidelines regarding logo usage and references to FIBA approval.</span></li></ul><p><strong><span lang="EN-US">Compliance</span></strong></p><p><span lang="EN-US">To ensure consistency and safety, any <strong>flooring coatings and maintenance products</strong> used in elite basketball competitions must meet FIBA's strict standards. These standards guarantee high-quality playing surfaces, vital for the performance and safety of athletes at top-level competitions.</span></p>

*The wood sample is shown on oak
2.5 L
5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Vegetable oil components

VOC:

165 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Coverage:

15-20 m²/L

Colours:

Natural

Cleaning of tools:

Use WOCA Solvent

Storage:

+10-30°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

2.5 L, 5 L

Odour:

Faint

Recommendation:

Clean tools with Solvent.

High Solid Master Oil is used for oil treatment of wooden floors, providing a durable, dirt- and water-resistant surface. The oil is designed for machine application and is ideal for finishing untreated, new, and freshly sanded indoor woodwork. It is suitable for all types of wooden floors.

Worksteps

Instructions
Products in use
The unfinished woodwork should be freshly sanded with grit 100-120. Clean the floor with 125 ml Wood Cleaner mixed into 5 litre water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended moisture max. 12%. The oiling is made at min. 18°C (64˚F). Product, room and floor temperature should be between 15°C–35°C. Ensure good ventilation at all times during the application and drying time.

  1. Shake the container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences. Apply the Oil with a short-haired paint roller in an even coat onto approx. 15-20 m²/L of floor.
  2. Leave the oil to be absorbed for . If the oil soaks quickly into the wood, apply more oil.
  3. Excess oil is removed or scraped onto next section of floor to be finished.
  4. The area is now polished with beige polishing pad under doodlebug or with polishing machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue stepwise till the whole floor has been finished.
  5. After the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finshed floor may be buffed with to of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. Remove any excess oil from the surface.
  6. After the floor can be used with caution.
  7. Tools may be cleaned with .
  8. Do not expose the floor to water during hardening time – approx. 36-48 hours (white oil 72 hours).
  9. After the hardening time the floor should be cleaned with , which leaves a protecting layer on the surface. Cleaning and maintenance may be done with respectively /as required.

Related products

View in same category

High Solid Master Oil

Oiling of wooden surfaces