Master Care

Varenummer:

For lacquered, vinyl/LVT and laminate floors

  • Care treatment to refresh floors
  • Extends the lifetime of the floor
  • Protects against wear and scratches
  • Easy to use
  • Indoor Climate labelled

*The wood sample is shown on oak

1 L
25 ML

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Triisobutylphosphate. Can trigger allergic reaction.

VOC:

30 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

60 m²/L

Colours:

Colourless

Cleaning of tools:

Use soap and water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L

Dilution:

Undiluted

Odour:

Faint

Solid content:

Under 10%

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

1-2 hours at 20°C

Re-treatment:

2-4 times a year or when required.

WOCA Master Care is a maintenance product designed to smooth out small scratches, enhance surface resistance, and provide effective protection against wear. Its application helps extend the lifespan of surfaces or floors. Since it does not form a thick coating, WOCA Master Care can be applied as needed for ongoing maintenance.

Worksteps

Instructions
Products in use
Thoroughly wash the floor with WOCA Intensive Wood Cleaner until the surface is perfectly clean. Rinse with clean water afterward and allow the floor to dry completely before applying WOCA Master Care.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply the concentrated care product in a thin and even coat, using a WOCA Wool Pad and WOCA Pad Holder. If the cloth/mop becomes dirty, rinse in clean water and wring thoroughly. Then continue the application. Do not apply additional Master Care once a surface has begun to dry.
  3. Leave the floor to dry for 1-2 hours at 20°C. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.
  4. For regular cleaning of the treated surface, use Master Cleaner.
For optimal results, use WOCA Master Cleaner for the regular cleaning of treated surfaces.