Maintenance Gel

Varenummer:

Revitalises oil-treated wood

  • Suitable for all types of oiled surfaces
  • Safe for Food Contact*
  • Makes surfaces even more durable
  • Simple application both manually and by machine 
  • Excellent results on factory-oiled/hardwax oil surfaces

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

The FIBA Equipment & Venue Centre is entrusted by FIBA to run a strict high-quality and comprehensive Approval Programme for basketball related products and equipment. Only established companies may submit their products for approval.

*The wood sample is shown on oak
200 ML
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Less than 5%: colouring agents.

VOC:

120 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

Regular maintenance: 20-30 m²/200 ml. Newly-sanded/non-maintained wood: 4-6 m²/200 ml.

Colours:

Natural

Cleaning of tools:

Use WOCA Solvent or turpentine

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

200 ML

Viscosity:

20-25 Sec. DIN Cup 4

Dilution:

Undiluted

Odour:

Faint

Solid content:

85-90%

Mixing ratio:

Ready to use. Do not dilute.

Between coats:

4-6 hours at 20°C

Light use:

4-6 hours at 20°C

Recommendation:

The oiled surface should not be exposed to water for the first 2-3 days, as this can cause stains and discoloration. Wood humidity must not exceed 18%. High temperature and low air humidity will shorten drying times. Low temperature and high air humidity will extend drying times.

Fully hard:

3 days at 20°C

Re-treatment:

Repeat the oil treatment when required.

Maintenance Gel is for the care and maintenance of oiled indoor wooden surfaces and floors. The oil is quick-drying and leaves an attractive, water and dirt-repellent surface. Maintenance Gel is suitable for furniture, kitchen work surfaces, floors and other indoor wooden surfaces. It can also be used for improved results on factory-oiled/UV-oiled surfaces.

Worksteps

Instructions
Products in use
It is important that both wood and oil are at a temperature of at least 15°C, and ideally about 20°C, and that air humidity is approx. 50 %. Make sure that the room is well-ventilated, for optimal evaporation and drying time.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours
  2. Sand the surface with 180 and vacuum clean the surface thoroughly.
  3. Apply an appropriate amount of gel to a Hand Scrubber Flex Kit White and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas (floors larger than 4 m²) it would be advantageous to use a polishing machine.
  4. Immediately wipe down the polished surface with a clean, dry lint-free cotton cloth. When prepping with a machine, the final polishing should be done with a cotton cloth beneath the buffer. The surface should not appear wet and no excess gel should remain on the surface.
  5. If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.
  6. Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days .
When used on UV-oiled surfaces, make sure to do a more thorough final polishing to remove all excess gel.

Products you need

  • Intensive Wood Cleaner
    Prepare
    Intensive Wood Cleaner

    Treatment preparation

  • Hand Scrubber Flex Kit White
    Hand Scrubber Flex Kit White

    For cleaning and polishing of wood

  • Polishing cloth, 50x55 cm
    Polishing cloth, 50x55 cm

    50 x 55 cm

Related products

View in same category

Worktop Oil (Industrial)

Oxidizing oil for wooden worktops

Natural Soap

Cleaning and protection of oiled wood

Worktop Kit

Oiling of wooden worktops and furniture

Maintenance Oil

Revitalises oil-treated wood

Oil Refreshing Soap

Revitalising natural cleaner for wood

Oil Refreshing Soap, Spray

Revitalising natural cleaner for wood (ready to use)