Reactive Stain
Item No.: 656610-2309 656610-2311 656610-2313 656610-2449
For pre-colouring of tannin-rich wood
- Unique look
- Quick colour reaction
- The final colour depends on the tannin content in the wood
- Must be treated afterwards with WOCA oils
Certifications
Product Details
Reactive Stain is a water-based stain specially formulated to create an aged and rustic look on tannin-rich wood in a fast and simple way. It reacts quickly after the application and provides a vibrant and distinctive colour, depending on the type of wood used. Modern and unique colour solutions can be achieved in combination with WOCA air-drying and UV-drying oils.
VOC:
10 g/l, maximum VOC content (A/i (WB)): 140 g/l.
Density:
1.00-1.10 g/ml.
pH-value:
pH 8-9
Shelf life:
2 years
Coverage:
20-30 m²/L
Colour product:
Grey
VOC:
10 g/l, maximum VOC content (A/i (WB)): 140 g/l.
Density:
1.00-1.10 g/ml.
pH-value:
pH 8-9
Shelf life:
2 years
Coverage:
20-30 m²/L
Colour product:
Mouse Gray
Packaging:
10 L
VOC:
10 g/l, maximum VOC content (A/i (WB)): 140 g/l.
Density:
1.00-1.10 g/ml.
pH-value:
pH 8-9
Shelf life:
2 years
Coverage:
20-30 m²/L
Colour product:
Dark grey
Packaging:
10 L
VOC:
10 g/l, maximum VOC content (A/i (WB)): 140 g/l.
Density:
1.00-1.10 g/ml.
pH-value:
pH 8-9
Shelf life:
2 years
Coverage:
20-30 m²/L
Colour product:
MØRK VINTAGE
Sanding- Final sanding grit 120-150
Spray- 40-60 gr/m2
- Or use sponge roller
Roller- Use sponge roller shore 5 or type 2 or type 3
- Apply the product 30-35 gr/m2
Even out- Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Hot air oven- Temperature 50-60 °C and good ventilation
- Or use stacking on racks
Stacking- 3-4 h by 20 °C
Intermediate sanding- Use sandingpaper grit 240-320
- After sanding apply a WOCA Treat product
Can be diluted with water to obtain the desired colour strength. Full colour development within 24 hours.
ERROR: ORA-00907: missing right parenthesis
