UV Oil 508
Item No.: 822180-508-200104 822180-508-200108 822180-508-200109 822180-508-200111 822180-508-200112 822180-508-200208 822180-508-200209 822180-508-200212 822180-508-200214 822180-508-200215 822180-508-200225 822180-508-200226 822180-508-200304 822180-508-200307 822180-508-200418 822180-508-200419 822180-508-200421 822180-508-200422 822180-508-200424 822180-508-200600 822180-508-200700 822180-508-2355 822180-508-390 822180-508
100 % UV oil for wooden floors that cures instantly
- Fast production flow
- Ensures UV-oiled floors that are ready for use
- Endless number of colours
- EN71-3 approved
Certifications
UV-Oil 508 is an extremely fast-drying 100 % UV oil that penetrate deeply into the wood, creating very durable wood floors. Using this oil ensures fast productions speeds as the proven UV technology dries and cures instantly and allows immediate packing at the end of the production line. The UV-oil is available as ready-to-use oils and can be tinted in various colours
- Get medical attention.
- If exposed or concerned, get medical advice.
- Wash with plenty of water.
- Avoid release to the environment.
- Danger!
- IF ON SKIN:
- If eye irritation persists:
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
- The following applies only for colours that contains more than 1 % white pigment.
- Wear protective gloves/protective clothing/eye protection/face protection.
- May cause an allergic skin reaction.
- Causes serious eye irritation.
- Harmful to aquatic life with long lasting effects.
- Dispose of contents and container in accordance with all local, regional, national and international regulations.
Sanding- Final sanding grit 150-180
Roller- Use smooth rubber roller shore 15-25 EPDM rubber
- Apply 15-20 gr/m2
Even out- Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
- Can also use pads
UV-lamp- Use 2 lamps Mercury 400-600 mj/cm2
- Use 1 Galium lamp if oil is pigmented
Intermediate sanding- Use sandingpaper grit 400-500
Roller- Use smooth rubber roller shore 15-25 EPDM rubber
- Apply 5 gr/m2
Even out- Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Uv-lamp- Use 2 lamps Mercury 600-800 mj/cm2
Viscosity correction: Correction can be made with WOCA Reactive thinner for 100 % UV-oil only, #822080-001.


