Master Filler Aqua

Item No.: 740556A

Water-based gap filler for wooden floors

Easy to sand
Water-based
Elastic consistency
Odour neutral

Colours

*The wood sample is shown on oak

Colourless

Packing

Certifications

Product Details

Master Filler Aqua is a water-based, thick and easy-to-sand gap filler for joins, holes and cracks in wooden parquet floors in e.g. brick or herringbone patterns. The filler produces a uniform finish, is extremely easy to work with and will not crack as it is elastic and allows the wood to work.

Contains : 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Safety data sheet available on request.

VOC:

0 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Shelf life:

1 year

Application Temperature:

10-25

Coverage:

15-20 m²/L

Colour:

Colourless

Packaging:

5 L

The surface must be completely clean, dry and free of dust, wax, grease, polish, etc. Grime and irregularities should be removed using a sanding machine. Before application of Master Filler Aqua, use grit 60-80 sandpaper for a final sanding.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Shake the container well before use.

Mix the Master Filler Aqua and the sanding residue into a nice and soft paste. The structure of the filler can be adjusted using the fine or coarse sanding residue.

Distribute the filler evenly, using a stainless steel applicator. Repeat if necessary.

Sand the surface with grit 100-120 sandpaper once the surface is dry.

The surface can then be lacquered using one of WOCA’s lacquers, following the product instructions.

Be aware of compatibility issues for woods with high tannic acid levels, or for merbau and exotic wood species. Master Filler Aqua must not be diluted.

Products you need

ERROR: ORA-00907: missing right parenthesis

Product image

Technical data Sheet

Safety data sheet