Exterior Deep Cleaner

Item No.: 607542A 607545A

Removes dirt, stains and grey patina

Rejuvinates old weathered and grey wood – removes patina
Ready mixed – easy to use
Deep cleaning
Thick viscosity – Non dripping
Removal of dirt and restores the natural colour of the wood

Colours

*The wood sample is shown on pressure impregnated pine

Colourless

Packing

Certifications

Product Details

Exterior Deep Cleaner is an intensive cleaning product, which rejuvenates patinated outdoor wood. It is a ready-mixed, thick-flowing product, which is easy to apply, even to vertical surfaces. Exterior Deep Cleaner penetrates deep into the wood and removes dirt, coatings and grey patina. For optimum protection, the wood should be treated with WOCA Exterior Wood Oil after cleaning.

Danger!
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Wear protective gloves/protective clothing/eye protection/face protection.
Causes skin irritation.
Causes serious eye damage.

Declaration:

less than 5%: non-ionic surfactants, cationic surfactants.

Density:

1.00-1.10 g/ml.

Coverage:

pH 1-2

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

8-10 m²/L

Colour:

Colourless

Packaging:

2.5 L,5 L

Declaration:

less than 5%: non-ionic surfactants, cationic surfactants.

Density:

1.00-1.10 g/ml.

Coverage:

pH 1-2

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

8-10 m²/L

Colour:

Colourless

Packaging:

2.5 L,5 L

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Soak the wood, using plenty of water. Use a garden hose if possible.

Using a brush or spray gun, apply as a smooth, uniform layer and allow the cleaner to work.

Exterior Deep Cleaner is ready-mixed and should not be diluted. It should only be applied in dry weather conditions. Avoid direct sunlight and excessive heat.

After approximately , scrub the wood using a stiff-bristled brush. We recommend that you use WOCA silicon brush on deckings for the best results.

Rinse off the with plenty of water and leave the wood to dry for at least 48-72 hours at 20°, before application of . The wood must be completely dry. If a completely smooth surface is desired, de-nip the wood with a sanding pad before oiling.

Products you need