Tropical Filler

Varenummer:

For filling gaps, knots and cracks in wood manually

  • Can be surface treated with both stain, lacquer, UV- and oxidizing oil 
  • Offers a countless number of colour options 
  • Made of natural raw materials 

20 L
Find forhandler

Produktdetaljer

  • Beskrivelse
  • Specifikationer
  • Teknisk datablad
  • Sikkerhedsdatablad

VOC:

0 g/l, VOC-grænseværdi (A/e (OB)): 400 g/l.

Massefylde:

2.40-2.60 g/ml.

PH:

pH 7-8

Holdbarhed:

3 år

Farver:

Røget eg, Eg, Sort

Opbevaring:

+10-25°C. Opbevares utilgængeligt for børn. Må ikke udsættes for høje temperaturer eller direkte sol. Opbevares frostfrit om vinteren og køligt om sommeren.

Emballage:

20 L

Densitet:

2.20-2.40 g/ml.

Tørstofindhold:

95-100%

Tropical Filler is a high-quality environmentally-friendly powder-based filler that is easy to mix. It has the same qualities as the old WOCA Wood Filler, however the Tropical Filler is adjusted to fit the tropical climate (high humidity areas i.e. 80 %), but can also be used in areas with lower humidity. It is suitable for various types of repairs in wood and is applicable for wood repairs with a depth up to 15 mm. You can mix and match the different colours as you wish, but it is also possible to add colour pigment or stain to the mixture to obtain a customized colour. There is no expiration date on the raw powder if it is properly protected from moisture, water and foreign objects.

Arbejdstrin

Instructions
Products in use
Mix the filler with cold water in the ratio: 1-1,5 parts of water to 3 parts of filler.Stir the mixture to a firm and homogeneous filler and apply it directly to the wood. (The mixture mustbe so firm that it stays on the putty knife). It is possible to work with the mixture for approx. 45minutes. Do not mix more filler than necessary.

Sanding
  • Final sanding grit 100
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or use stacking
Stacking
  • 3-4 h by 20 °C
Intermediate sanding
  • Final sanding grit 120-150
Wire brushing
  • We recommend adding 10% Hardener into the product if it should be wire brushed after drying. Can be treated with all WOCA products
Viscosity Correction: A small amount of water may be added to the mixture within the first 5 minutes, if needed.