Exterior Oil Industry

Varenummer:

Water-based oil for outdoor wood

  • Provides a strong water and dirt-repellent surface
  • Enhances the natural colour and grain of the wood
  • Contains UV filter and protects the wood from deterioration
  • Thick viscosity - no dripping - easy to use
  • Provides an open-porred, breathable surface
  • Fast-drying

20 L
5 L
1000 L
200 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

15 g/l, VOC-grænseværdi (A/f (VB)): 130 g/l.

Massefylde:

1.00-1.10 g/ml.

Holdbarhed:

3 år

Påføringstemperatur:

+15-30°C og ca. 50 % luftfugtighed.

Rækkeevne:

20-25 m²/L

Farver:

Natur, Lærk, Bangkirai, Grå, Valnød, Hvid, Stengrå, Merbau, Hasselnød

Opbevaring:

+10-25°C. Opbevares utilgængeligt for børn. Må ikke udsættes for høje temperaturer eller direkte sol. Opbevares frostfrit om vinteren og køligt om sommeren.

Emballage:

20 L

Skridsikker (DIN 51130):

R10

Viskositet:

25-30 Sek. DIN Cup 4

Kan opløses med:

Vand

Fugtindhold:

The moisture content of the wood must not exceed 17%.

Tørstofindhold:

20-30%

Vi anbefaler:

Please note that Exterior Wood Oil in the black, anthracite and walnut colour are recommended to be finished with a coat of Exterior Wood Oil Natural to avoid colour transfer

Gennemhærdet:

24-48 timer ved 20°C

Exterior Wood Oil is to be used outdoors for basic treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, cladding etc. The special water-based composition of oil components ensures that the product is water-dilutable and friendly to the environment. The oil enhances the natural colour and grain of wood. Exterior Wood Oil Natural is recommended to enhance the natural colour structure of the wood. For rejuvenating of old wood surfaces, the pigmented oils are ideal as they recreate the original colour of the wood. A change of colour of the deck is also possible by applying e.g. the grey, anthracite or black oil.

Worksteps

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 100
Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply the product 30-35 gr/m2
  • Or use spraygun
Spray
  • 30-40 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove excess oil by cloth
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or drying on racks
Stacking
  • 4-6 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 320-400
  • Optional
Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply 15-20 gr/m2
  • Or use spraygun
Spray
  • 20-30 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove excess oil by cloth
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or drying on racks
Stacking
  • 12 h by 20 °C before packing
Viscosity correction: Correction is made with a maximum of 5-10 % water.Always use WOCA Outdoor Primer before applying Exterior Oil on oak, western red cedar and all other softwood species.