Clean and Care Kit for Oiled Wood

Item No.: 699963DE-N EAN: 5708055044066 699963UK-N EAN: 5708055043960

Cleans and protects oiled floors.

Complete kit for cleaning and maintaining oiled floors.
Contains both WOCA Natural Soap and WOCA Maintenance Oil
Suitable for regular maintenance of oiled wooden surfaces
Maintenance Oil can be applied both manually and mechanically
Helps to preserve the appearance and natural properties of the wood

Colours

*The wood sample is shown on oak

Natural

Packaging

Certifications

Product Details

WOCA Oil Care Kit contains products for cleaning and maintaining oiled floors. The set includes WOCA Maintenance Oil for the maintenance of oil-treated wooden surfaces and WOCA Natural Soap for regular cleaning. Maintenance Oil is used for the maintenance of oiled floors and can be applied both manually and mechanically. Natural Soap is a wood soap for cleaning oiled surfaces, which removes dirt and helps preserve the surface’s properties.

Warning!
Wear eye/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Contains: 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
Causes serious eye irritation.

Density:

0.85-0.90 g/ml.

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colour product:

Natural

Density:

0.85-0.90 g/ml.

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colour product:

Natural

Packaging sizes:

1 L

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Clean the floor with 125 ml Intensive Wood Cleaner mixed into 2.5 L water. Leave the floor to dry for at least 7-8 hours. The floor must be completely dry.

Shake the container well before use.

Apply approx. 1 dl of Maintenance Oil per 4 m² floor using a pad, short-bristled paint roller (3-4 mm) or a polishing machine with a white or beige pad on slightly larger areas.

It is important that Maintenance Oil is carefully polished into the wood. Continue polishing until the wood appears saturated and the surface looks uniform.

Wipe down the floor with clean, dry cotton cloths before proceeding with the next section of floor to be finished. The floor should not appear wet and there should not be any excess oil left on the surface after polishing.

Continue stepwise till the floor has been finished.

When polished with polishing machine the floor will be pre-hardened after 4 hours and may cautiously be taken into use. Manually polished floors may be taken into use after 24-48 hours. Do not expose the floor to water during hardening time of .

Do not expose the floor to water or cleaning for the first 7 days while the oil hardens. The natural soap is used for cleaning the surface after the floor has hardened.

Products you need