UV Oil 506

Numéro d'article:

100 % UV-topcoat for wooden floors with medium gloss

  • UV-topcoat with medium gloss
  • Topcoat in combination with WOCA UV-oils
  • Ensures UV-oiled floors that are ready for use

10 L

Détails du produit

  • La description
  • Caractéristiques
  • Fiche technique
  • Fiche de données de sécurité

COV:

0 g/l, teneur maximale en COV (A/e (PS)): 400 g/l.

Densité:

1.10-1.20 g/ml.

durée de conservation:

2 années

Consommation:

50-80 m²/L

Couleurs:

Naturel

Stockage:

+10-25°C. Tenir hors de portée des enfants. Ne pas exposer à la chaleur (par ex. au soleil). A conservez à l’abri du gel en hiver et au frais en été.

Emballage:

10 L

Teneur en matière sèche:

95-100%

Durcissement complet:

Immédiatement après le séchage UV

UV-Oil 506 is a 100 % UV-oil that provides wooden floors with a durable finish with medium gloss for added strength. Using this oil ensures fast production speeds as the proven UV-technology dries and cures instantly and allows immediate packing at the end of the production line. Wooden floors finished with this topcoat do not require additional on-site treatment after installation.The oil can stand alone, but can also work as a topcoat for UV-oil 501

Étapes de travail

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 15-20 gr/m2
  • Uv-oil 501 can be used as first coat
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2
  • By pigmented oils please use Galium lamp
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 5-10 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Optional
Uv-lamp
  • Use 2 lamps Mercury 800-1000 mj/cm2