Furniture Sealer

Numéro d'article:

Sealing of wood furniture before lacquering

  • Excellent gab filling
  • Creates very uniform surfaces
  • Perfect with all-covering colours
  • Non-toxic product

20 L

Détails du produit

  • La description
  • Caractéristiques
  • Fiche technique
  • Fiche de données de sécurité

COV:

0 g/l, teneur maximale en COV (A/e (PA)): 130 g/l.

Densité:

1.00-1.10 g/ml.

durée de conservation:

2 années

Consommation:

8-10 m²/L

Couleurs:

Incolore

Stockage:

+10-25°C. Tenir hors de portée des enfants. Ne pas exposer à la chaleur (par ex. au soleil). A conservez à l’abri du gel en hiver et au frais en été.

Emballage:

20 L

Teneur en matière sèche:

30-40%

Temps de séchage:

1-2 heures à 20°C

Temps de séchage avant deuxième traitement:

1-2 heures à 20°C

Furniture Sealer is a water-based, single-component and environmentally friendly product designed to fill up smaller gabs in the wood and create very smooth and uniform surfaces. It is easy to sand and can be applied to many types of wood, e.g. oak, beech, ash, walnut, teak and mahogany.

Étapes de travail

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 180-240
Spray
  • 100-120 gr/m2
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or stacking on racks
Stacking
  • 1-2 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 400-500
Spray
  • 60-100 gr/m2
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or stacking on racks
Stacking
  • 1-2 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Apply WOCA Lacquer
The quality and uniformity of the wood and the intermediate sanding are crucial to the final surface finish. Remove residue after sanding as prescribed.