UV Oil 506

Varenummer:

100 % UV-topcoat for wooden floors with medium gloss

  • UV-topcoat with medium gloss
  • Topcoat in combination with WOCA UV-oils
  • Ensures UV-oiled floors that are ready for use

This product is currently out of stock and unavailable.

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

0 g/l, maximum VOC content (A/e (SB)): 400 g/l.

Density:

1.10-1.20 g/ml.

Shelf life:

2 years

Coverage:

50-80 m²/L

Colours:

Natural

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

10 L

Solid content:

95-100%

Fully hard:

Immediately after UV-drying

UV-Oil 506 is a 100 % UV-oil that provides wooden floors with a durable finish with medium gloss for added strength. Using this oil ensures fast production speeds as the proven UV-technology dries and cures instantly and allows immediate packing at the end of the production line. Wooden floors finished with this topcoat do not require additional on-site treatment after installation.The oil can stand alone, but can also work as a topcoat for UV-oil 501

Worksteps

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 15-20 gr/m2
  • Uv-oil 501 can be used as first coat
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2
  • By pigmented oils please use Galium lamp
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 5-10 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Optional
Uv-lamp
  • Use 2 lamps Mercury 800-1000 mj/cm2