Furniture Care Kit, Oil

Varenummer:

For refreshing of oiled furniture

  • All you need - in one box
  • Provides a water- and dirt-resistant surface 
  • Refreshes the natural glow of the wood 
  • Safe for food contact
  • Easy to apply 
  • Quick-drying

*The wood sample is shown on oak

1 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Colours:

Natural

Cleaning of tools:

Use turpentine

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L

Odour:

Faint

Solid content:

85-90%

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

12-24 hours at 20°C

Between coats:

4-6 hours at 20°C

Light use:

4-6 hours at 20°C

Recommendation:

The oiled surface should not be exposed to water for the first 2-3 days, as this can cause stains and discoloration. Wood humidity must not exceed 18%. High temperature and low air humidity will shorten drying times. Low temperature and high air humidity will extend drying times.

Fully hard:

3 days at 20°C

Re-treatment:

Repeat the oil treatment when required.

Wood Furniture Care Kit, Oil is used for refreshing of oiled wood furniture so they stay beautiful for many years. It cares for and refreshes the wood, giving your furniture an attractive and durable oil-treated surface. The kit contains all you need for the entire treatment: 200 ml Maintenance Gel, 1L Intensive Wood Cleaner, a black sanding pad, a white polishing pad, a lint-free cloth and work instructions.

Worksteps

Instructions
Products in use
Prior to treatment with Maintenance Gel, the wood surface must be cleaned thoroughly. Clean the surface with Intensive Wood Cleaner (mixed 1:20) and leave it for 5 minutes. Wipe the surface with a clean cloth that has been wrung out in clean water. The furniture should dry for at least 8 hours at 20°C. If the surface has become uneven (grainraise), the wood can be sanded with the black sanding pad (gritt 240-400). Remove sanding residue using the small brush head of your vacuum cleaner.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Apply an appropriate amount of gel to a Hand Scrubber Flex Kit White and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas (floors larger than 4 m²) it would be advantageous to use a polishing machine.
  2. Then wipe off all excess oil with a lint-free cotton cloth. No excess oil should remain on the surface.
  3. If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.
  4. Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days .
For daily cleaning, use a tightly wrung cloth with WOCA Natural Soap or WOCA Natural Soap, Spray.When used on UV-oiled surfaces, make sure to do a more thorough final polishing to remove all excess gel.