Master TS Line Marking

Item number:

Line Marking for sports floors

  • Very strong and resistant
  • Danish Indoor climate certified
  • For professional marking of sports floors
  • Designed for use with Master TS Sports Lacquer

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

FIBA

The FIBA Equipment & Venue Centre is entrusted by FIBA to run a strict high-quality and comprehensive Approval Programme for basketball related products and equipment. Only established companies may submit their products for approval.

*The wood sample is shown on beech
2.5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

110 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

1 year

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

6-10 m²/L

Colours:

Yellow, Blue, Green, White, Black, Red

Cleaning of tools:

Use water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

2.5 L

Viscosity:

20-25 Sec. DIN Cup 4

Pot life:

The mixture must be used within 1,5-2 hours. Shake/stir thoroughly before use.

Mixing ratio:

100 ml for 5 L (1:50)

Drying time:

2-3 hours at 20°C

Between coats:

2-3 hours at 20°C

Fully hard:

5 days at 20°C

Master TS Line Marking is a lacquer-based paint developed for marking lines in sports and recreational facilities, such as sports halls and multi-purpose arenas. The line marking paint is water-based and specifically designed for lacquered wooden floors, complying with the European sports standard EN 14904. It is available in six standard RAL colours and is both Danish Indoor Climate Certified and DIBt-approved, ensuring the product meets strict environmental and health standards.Colours: Yellow (RAL 1021), Red (RAL 3000), Blue (RAL 5010), Green (RAL 6029), White (RAL 9016), Black (RAL 9017)

Worksteps

Instructions
Products in use
Preparation of untreated and sanded floors:Apply 1 coat of Woca Base Primer and 1-2 coats of Woca Master TS-2K Lacquer according to the product instructions before applying Master TS Line Marking.

  1. The pre-treated floor is lightly sanded with grit 120-180 and thoroughly vacuumed
  2. Mask off all lines and areas to be painted with tape, ensuring the tape adheres tightly to the floor to create a sharp edge without bleeding. We recommend TESA 4440.
  3. To avoid color differences, mix different batch numbers before application.
  4. The Master TS Line Marking is applied with a small paint roller or brush. (White and yellow line marking may require two coats to achieve full color coverage)
  5. After 2-3 hours of drying time (touch dry), apply one coat of Master TS 2K Lacquer to the entire floor to protect the line marking and achieve consistent friction on the sports floor.
For previously lacquered/new factory lacquered floors, it is always recommended to perform an adhesion test on a small area before starting the floor marking. The test area should be sanded with grit 120-180, and Master TS Line Marking should be applied to the area twice with a 4-hour interval. Allow the line marking to dry for 24 hours, then check the adhesion by gently scraping the line.If the adhesion is good, follow the instructions.

Products you need

  • Master Base Primer
    Treat
    Master Base Primer, natural

    Priming of wood before lacquering

  • Sanding Grit 16
    Sanding grit 16"

  • Lacquer Roller Waterbased
    Lacquer Roller Water-based

    For waterbased products

Related products

View in same category

Paint Roller Holder

For applying oils and lacquers

Telescope Stick

For optimum reach

Lacquer Bucket

for lacquer, hardwax oil and paint