Master Optima Lacquer

Item No.: 690125A 690126A 690127A

For commercial areas with medium traffic

Strong and resistant
Rich and full appearance
Low odour
Indoor climate labelled

Colours

*The wood sample is shown on oak

Colourless – Matt

Colourless – Silk-matt

Colourless – Silk-gloss

Packing

Certifications

Product Details

Master Optima Lacquer is a fast-drying, water-based floor lacquer that has been formulated to leave wood with a durable and resistant surface. The high solids content humidifies the wood slightly, leaving the surface with a rich and full appearance. The lacquer is easy to apply and has good resistance to water and chemicals, making it ideal for offices and other commercial areas with medium traffic. This indoor climate labelled lacquer is applied in a convenient and safe way, and ensures a comfortable indoor climate afterwards.

Contains : 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Safety data sheet available on request.

VOC:

105 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

1 year

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Matt

Packaging:

5 L

VOC:

95 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Silk-matt

Packaging:

5 L

VOC:

85 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Silk-gloss

Packaging:

5 L

It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before priming or lacquering. When priming, use WOCA Master Base Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Primer and a coat of should be applied undiluted, using a brush or roller. Alternatively, two coats of lacquer can be applied. Leave the surface to dry until next day.

Sand the surface with and vacuum clean the surface thoroughly.

Apply the final coat of undiluted .

Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.

Products you need