Master Base Primer, white

Item No.: 690152A

Priming of wood before lacquering

Quick-drying
Minimizes side-bonding
Creates a light nordic surface

Colours

*The wood sample is shown on oak

White

Packing

Certifications

Product Details

Master Base Primer, Nordic White is a water-based wood primer that is ideal for areas where a light nordic look is required. The primer seals the wood and minimizes the tannic acid penetration and side-bonding. It is only suitable for untreated or sanded surfaces for all wood types before treatment with other water-based WOCA floor lacquers.

Contains : 1,2-benzisothiazol-3(2H)-one.. May produce an allergic reaction.
Safety data sheet available on request.

VOC:

70 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Coverage:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

White

Packaging:

5 L

Final sanding must be done with fine sandpaper (grit 120). Vacuum carefully afterwards. The surface must be free of dirt, grease, wax and dust. The primer must be room temperature before use.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Apply the primer undiluted with brush or roller, following the wood along its length, and allow the surface to dry. Please note: For a more intensive light appearance, apply another coat of primer. Sanding must be done after the first coat with GRIT sandpaper (a treatment with a white-pigmented material generally requires more even sanding to prevent the pigments from sticking in the sanding grooves).

When the wanted appearance has been achieved, apply 1-2 topcoats with one of the WOCA floor lacquers. Always apply a minimum of three coats (primer and lacquer) for ideal protection.

It is not recommended to apply more than two coats of primer/lacquer per day due to risk of excessive wood swelling.

Products you need