LUK
I need products for
View all products
LUK
Inspiration
Find inspiration here
Maintenance Gel
Revitalises oil-treated wood
- Suitable for all types of oiled surfaces
- Safe for Food Contact*
- Makes surfaces even more durable
- Simple application both manually and by machine
- Excellent results on factory-oiled/hardwax oil surfaces
Product details
- Description
- Specifications
- Technical data sheet
- Safety data sheet
| Declaration: | Less than 5%: colouring agents. |
|---|---|
| VOC: | 120 g/l, maximum VOC content (A/i (SB)): 500 g/l. |
| Density: | 0.90-0.95 g/ml. |
| Shelf life: | 3 years |
| Application Temperature: | +15-25°C and approx. 50% air humidity. |
| Colours: | Natural |
| Cleaning of tools: | Use WOCA Solvent or turpentine |
| Storage: | +10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer. |
| Packaging: | 200 ML |
| Viscosity: | 20-25 Sec. DIN Cup 4 |
| Dilution: | Undiluted |
| Odour: | Faint |
| Solid content: | 85-90% |
| Mixing ratio: | Ready to use. Do not dilute. |
| Between coats: | 4-6 hours at 20°C |
| Light use: | 4-6 hours at 20°C |
| Recommendation: | The oiled surface should not be exposed to water for the first 2-3 days, as this can cause stains and discoloration. Wood humidity must not exceed 18%. High temperature and low air humidity will shorten drying times. Low temperature and high air humidity will extend drying times. |
| Fully hard: | 3 days at 20°C |
| Re-treatment: | Repeat the oil treatment when required. |
Maintenance Gel is for the care and maintenance of oiled indoor wooden surfaces and floors. The oil is quick-drying and leaves an attractive, water and dirt-repellent surface. Maintenance Gel is suitable for furniture, kitchen work surfaces, floors and other indoor wooden surfaces. It can also be used for improved results on factory-oiled/UV-oiled surfaces.
Worksteps
- Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours
- Sand the surface with 180 and vacuum clean the surface thoroughly.
- Apply an appropriate amount of gel to a Hand Scrubber Flex Kit White and distribute over the surface in a thin, even coat. Continue polishing until the wood seems saturated and the surface has a uniform appearance. It is recommended to work on small areas at a time, as the gel is quick-drying. For larger areas (floors larger than 4 m²) it would be advantageous to use a polishing machine.
- Immediately wipe down the polished surface with a clean, dry lint-free cotton cloth. When prepping with a machine, the final polishing should be done with a cotton cloth beneath the buffer. The surface should not appear wet and no excess gel should remain on the surface.
- If the wood does not seem fully saturated after 4-6 hours, repolish with less gel than the first treatment, but follow the same procedure.
- Wait 4-6 hours before using the surface. Avoid getting water or dirt on the wooden surface for the next 3 days .
