Master Color Oil

Master Color Oil

Product form

SKU: 532325US

  • The Original WOCA Oil.
  • Penetrating oil with color and oil in 1 product.
  • Plant based oil that gives the wood a beautiful, breathable surface.
  • For residential wood flooring, furniture, cabinetry, paneling and ceilings.

With Master Colour Oil, you can achieve both vibrant and long-lasting color for your woodwork. It penetrates deeply to protect and enhance the wood's natural characteristics, while providing a hardwearing finish with superior water and dirt resistance. Transform and protect your wood with ease.

    Find a Retailer

    Product details

    Specifications

    VOC: 145 g/l, maximum VOC content (A/i (SB)): 500 g/l.

    Density: 0.90-0.95 g/ml.

    Shelf life: 3 years

    Application Temperature: +59-77°F and approx. 50% air humidity.

    Coverage: 275-325 sq.ft./2.5L

    Colors: Natural, White, Brazil Brown, Castle Grey, Extra White, Walnut, Black, Antique, Extra Grey, Rhode Island Brown

    Cleaning of tools: Use WOCA Solvent or turpentine

    Storage: +50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

    Packaging: 2.5L

    Dilution: WOCA Solvent (does not normally need to be diluted).

    Solid content: 50-55%

    Drying time: 12-24 hours at 68°F

    Fully hard: 7 days at 68°F

    Instructions
    Product, room and floor temperature must be between 59-86°F. Wood humidity must not exceed 12%. Ensure good ventilation during application and when drying. The wood must be newly sanded, use grit 100-120 for the final sanding. Vacuum thoroughly. Clean the wood with WOCA Intensive Wood Cleaner and leave it to dry for at least 8 hours before applying the oil.

    Always remember to test on a less visible spot to check the compatibility of the surface with the product.

    Thoroughly shake the container of Master Color Oil , both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch.

    1. Apply the oil using a short-bristled paint roller in an even coat. Work in sections of no more than 110 sf at a time.
    2. Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
    3. Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a 3M red pad.
    4. Immediately remove excess oil with WOCA Polishing Cloths under a clean buffing pad until the surface no longer appears wet. Continue until the whole area has been polished and excess oil has been thoroughly removed.
    5. 12-24 hours later at 68°F,  apply a 2nd coat of oil without a paint roller.  Pour approximately 4 ounces (1/2 cup) of oil directly on the floor and immediately start polishing the oil with the floor buffer and a 3M white pad.  The oil should be polished thoroughly, and then immediately remove excess oil with a WOCA Polishing Cloth under a clean buffing pad until the surface no longer appears wet, repeating Step 4.
    The surface can be used with caution after 12 hours and is fully hardened after 7 days at 68°F and 55% humidity.  Do not expose the surface to water or clean it for the first 7 days while the oil is hardening. After 7 days the floor can be cleaned with WOCA Natural Soap, which gives the surface extra protection.
    Technical Data Sheet
    Safety Data Sheet
    Certifications

     

    Danish Indoor Climate Label is a voluntary labeling system for products and materials which can document the effect of off gassing. Indoor climate labeled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

    All floor coating products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentally friendly products.

    DIBt is a German institute that tests and issues technical approvals for building materials. The goal is to improve the working environment for floor installers while ensuring a safe indoor air quality for the final consumer.

     

    The migration of metals (As, Hg, Se, Cr, Sb, Cd, Pb, Ba) of the sample was tested according EN 71 Part 3 1995. There was no evidence for migration of the named metals above the limit of detection (10-50 ppm). All interior WOCA products are suitable for toys.

    WOCA Denmark’s products are tested in neutral laboratories, e.g. by the Institute of Biological Building Materials in Rosenheim and are approved and certified. The impact on the health of people and environment of the methods of production and the products that are used for building, furnishing and living is examined.

    Related products

    Recommended Products to make your project a success.
    Footer image

    © 2024 WOCA USA, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account