WOCA USA office and warehouse are closed on Friday, March 29th in observance of Good Friday.

Invisible Primer

Invisible Primer

Product form

SKU: 526025A

  • Primer for Invisible Oil
  • Product 1 of the Invisible Oil System
  • Ideal for residential settings.
  • Water-based.
  • Best for light colored wood.

Part 1 of the Invisible Oil System. Water based primer before application of Invisible Oil.

Invisible Oil Primer is a water-based primer that provides excellent adhesion and a matte, untreated look with WOCA Invisible Oil. It is the first step in a high quality, light wood oiling system and should be used with WOCA Invisible Oil. This system creates a comfortable, soft and water-resistant surface that is easy to maintain.

    Product details

    Specifications

    Density: 1.00-1.10 g/ml.

    pH-value: pH 7-8

    Shelf life: 2 years

    Application Temperature: +59-77°F and approx. 50% air humidity

    Coverage: 210-325 sq.ft./2.5L

    Color: Natural

    Cleaning of tools: Use warm water

    Storage: +50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

    Packaging: 2.5 Liter

    Viscosity: 25-30 Sec. DIN Cup 4

    Dilution: Undiluted

    Odor: Faint

    Solid content: 10-20%

    Drying time: 3-4 hours at 68 degrees.

    Recommendation: Do not expose the surface to water for the first 7 days while the oil is hardening.

    Fully hard: 7 days at 68°F

    Instructions

    It is important that the product, the room and the floor are at a temperature between 59°F and 77°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. The wood must be newly-sanded, with grit 100-150 for the final sanding. Vacuum thoroughly.

    Always remember to test on a less visible spot to check the compatibility of the surface with the product.

    1. Wash the floor with WOCA Intensive Wood Cleaner and leave the floor to dry for at least 8 hours before application of the primer.

    2. Thoroughly shake the container of Invisible Oil Primer, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch.  Apply the primer using a short-bristled paint roller in an even coat. Work in small areas of no more than 215 sq.ft. at a time.

    3. Leave the primer to soak in for up to 5 minutes.

    4. Using a buffing machine with a maroon pad polish the primer into the wood until the floor appears saturated. Regularly change the maroon buffing pad to prevent the primer from lumping.

    5. Remove excess oil care with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.

    6. Leave the floor to dry for 3-4 hours at 68°F. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time

    7. When dry, sand the dry surface with a maroon pad and vacuum thoroughly.

    8. Apply Invisible Oil. Carefully follow the product instructions.  Invisible Oil must be applied when using Invisible Primer. After 24 hours, we recommend that the primed and oiled surface is treated with Invisible Oil Care to improve the floor’s resistance to stains and wear.

    Technical Data Sheet
    Safety Data Sheet
    Certifications

    Danish Indoor Climate Label is a voluntary labeling system for products and materials which can document the effect of off gassing. Indoor climate labeled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

    Footer image

    © 2024 WOCA USA, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account