Products
Master EP Lacquer

Master EP Lacquer

Item No.: 690110A

All round water-based solution for domestic areas

  • Water-based
  • Indoor climate labelled
  • Low odour
  • Easy application, good flowability
  • Durable, matte surface

Colours

Colourless – Matt

Packaging

Certifications

Emission Class A+
The French labeling system is a mandatory classification of materials, such as floor treatment products, based on their VOC emissions to indoor air. A+ is the highest rating, indicating improved indoor air quality with very low emissions.
Environmental Product Declaration (EPD)
Environmental Product Declaration (EPD) supports greater transparency and documented sustainability. EPDs present verified data on a product’s environmental impact throughout its entire life cycle, based on recognized standards and third-party verification.
Product Details

Master EP Lacquer is a water-based, low-odor floor lacquer that provides wood with a durable and resistant surface, ideal for medium traffic. The lacquer combines excellent performance with suitability for residential use, thanks to its exceptional flow and quick drying time. It delivers a light, Nordic look and is particularly well-suited for oak surfaces.

  • Contains: 1,2-benzisothiazol-3(2H)-one; Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H -isothiazol-3-one. May produce an allergic reaction.
  • Safety data sheet available on request.
VOC:
105 g/l, maximum VOC content (A/e (WB)): 130 g/l.
Density:
1.00-1.10 g/ml.
pH-value:
pH 7-8
Shelf life:
2 years
Application Temperature:
+15-25°C and approx. 50% air humidity.
Coverage:
8-10 m²/L
Colour product:
Colourless – Matt
Packaging sizes:
5 L

It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before priming or lacquering. When priming, use WOCA Basic Pro Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

  • Primer and a coat of Master EP Lacquer should be applied undiluted, using a brush or roller. Alternatively, two coats of lacquer can be applied. Leave the surface to dry until next day.
  • Sand the surface with 100-120 and vacuum clean the surface thoroughly.
  • Apply the final coat of undiluted Master EP Lacquer.

    • Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.

    Products you need
    Intensive Wood Cleaner

    Treatment preparation
    Master Base Primer, natural

    Priming of wood before lacquering
    Master Cleaner

    For lacquered, vinyl and laminate floors
    Product image
    Technical data Sheet
    Safety data sheet
    Related products
    599650.png

    Paint Roller Holder
    For applying oils and lacquers
    88004.png

    Paint Roller Cylinder, 4 mm
    Applies oils and hardwax oils in a thin, even layer for high‑quality surface finish.
    599651.png

    Telescope Stick
    For optimum reach