Master TS Line Marking

Varenummer:

Marcaje de líneas para suelos deportivos

  • Muy fuerte y resistente
  • Para el marcaje profesional de suelos deportivos
  • Diseñado para su uso con Master TS Sports Lacquer

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

*La muestra de madera se muestra en haya
2.5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

COV:

110 g/l, contenido máximo de COV (A/e (BA)): 130 g/l.

Densidad:

1.00-1.10 g/ml.

Valor de pH:

pH 7-8

Durabilidad:

1 año

Temperatura de aplicación:

+15-25°C y 50% de humedad del aire.

Rendimiento:

6-10 m²/L

Colores:

Amarilla, Azul, Verde, Blanco, Negro, Rojo

Limpieza de herramientas:

Utilizar agua

Almacenamiento:

+10-25°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

2.5 L

Viscosidad:

20-25 Seg. DIN Cup 4

Vida útil:

La mezcla debe usarse en las siguientes 1,5-2 horas. Agite/remueva bien antes de usar.

Proporción de la mezcla:

100 ml en 5 L (1:50)

Tiempo de secado:

2-3 horas a 20°C

Entre capas:

2-3 horas a 20°C

Endurecido completo:

5 días a 20°C

Master TS Line Marking es una pintura a base de laca desarrollada para marcar líneas en instalaciones deportivas y recreativas, como pabellones deportivos y arenas multiusos. La pintura para marcaje de líneas es a base de agua y está diseñada específicamente para suelos de madera barnizados. Está disponible en seis colores RAL estándar.

Worksteps

Instructions
Products in use
Preparation of untreated and sanded floors:Apply 1 coat of Woca Base Primer and 1-2 coats of Woca Master TS-2K Lacquer according to the product instructions before applying Master TS Line Marking.

  1. El suelo pretratado se lija ligeramente con grano 120-180 y se aspira a fondo.
  2. Enmascare todas las líneas y áreas que se van a pintar con cinta adhesiva, asegurándose de que la cinta se adhiera firmemente al suelo para crear un borde nítido sin filtraciones. Recomendamos TESA 4440.
  3. Para evitar diferencias de color, mezcle diferentes números de lote antes de la aplicación.
  4. La marcaje de línea Master TS se aplica con un pequeño rodillo o pincel. (El marcado de líneas blancas y amarillas puede requerir dos capas para lograr una cobertura total del color.)
  5. Después de 2-3 horas de tiempo de secado (seco al tacto), aplique una capa de Master TS 2K Laca en todo el suelo para proteger la marcación de las líneas y lograr una fricción uniforme en el suelo deportivo.
Master TS 2K Line Marking blanco y amarillo puede necesitar 2 manos para lograr un color completo

Productos que necesitas

  • Master Base Primer
    Treat
    Master Base Primer, natural

    Imprimación de la madera antes de barnizar

  • Sanding Grit 16
    Sanding grit 16"

  • Lacquer Roller Waterbased
    Lacquer Roller Water-based

    For waterbased products

Related products

View in same category

Paint Roller Holder

For applying oils and lacquers

Telescope Stick

For optimum reach

Lacquer Bucket

for lacquer, hardwax oil and paint