Driftwood Lye

Varenummer:

Da al roble un acabado envejecido

  • Da al roble un acabado envejecido
  • Crea soluciones de color únicas.
  • De base acuosa
  • Reacciona con los taninos de la madera - adecuado para madera de roble.

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

*La muestra de madera se muestra en roble
100 ML
2.5 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

COV:

10 g/l, contenido máximo de COV (A/g (BA)): 30 g/l.

Densidad:

1.10-1.20 g/ml.

Valor de pH:

pH 13-14

Durabilidad:

3 años

Temperatura de aplicación:

+15-30°C y 50% de humedad del aire.

Rendimiento:

8-10 m²/L

Colores:

Blanco, Gris

Limpieza de herramientas:

Utilizar agua

Almacenamiento:

+10-25°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

2.5 L

Dilución:

Sin diluir

Olor:

Característica

Tiempo de secado:

6-12 horas 20°C

Driftwood Lye es un producto único a base de agua, que da a la madera un efecto envejecido. Este producto es principalmente para madera de roble. Al utilizar este producto, la madera obtendrá un diseño bidimensional muy agradable. Finalmente, la superficie debe ser tratada con uno de los aceites WOCA.

Worksteps

Instructions
Products in use
La superficie de trabajo sin tratar debe estar limpia, seca y haber sido pulida con lija fina (grano 100-120) antes de aplicar la lejía.

Recuerde siempre hacer una prueba en un lugar poco visible, a fin de verificar la compatibilidad de la superficie con el producto.

  1. Agite bien el recipiente y vierta la Lye en un cubo de plástico. Es importante que no queden pigmentos en el recipiente. Debe agitarse regularmente durante la aplicación para evitar que los pigmentos se asienten en el fondo.
  2. Aplique una capa regular de la lejía con el Aplicador WOCA, con una brocha de nylon o un rodillo en el sentido longitudinal de la madera. Emplee por lo menos 1 L de lejía por cada 8-10 m²/L de madera. Deje secar la madera entre 6-12 horas 20°C.
  3. Desbaste las fibras que sobresalgan y elimine el exceso de pigmento con una almohadilla de pulido media (verde o bordeaux). Elimine el polvo de lijado con una aspiradora.
  4. Acabe la superficie de madera con un aceite WOCA.

Productos que necesitas

  • Intensive Wood Cleaner
    Prepare
    Intensive Wood Cleaner

    Preparación para tratamiento

  • Lye Wiper Fur
    Lye Wiper Fur

    Applying lye and stain

  • Lye Wiper Handle
    Lye Wiper Handle

    Applying lye and stain

  • Diamond Oil Active
    Treat
    Diamond Oil Active

    Tratamiento con aceite de suelos de madera

Related products

View in same category

Telescope Stick

For optimum reach

Natural Soap

Limpieza y protección de maderas aceitadas

Oil Refreshing Soap

Limpiador revitalizante natural para madera
+4

Master Colour Oil

Tratamiento con aceite de suelos de madera

Finish Sanding SPP 16″

Maroon coloured floor polishing pad