Master EP Lacquer

Item No.: 690110A

All round water-based solution for domestic areas

Water-based
Indoor climate labelled
Low odour
Easy application, good flowability
Durable, matte surface

Colours

Colourless – Matt

Packing

Certifications

Product Details

Master EP Lacquer is a water-based, low-odor floor lacquer that provides wood with a durable and resistant surface, ideal for medium traffic. The lacquer combines excellent performance with suitability for residential use, thanks to its exceptional flow and quick drying time. It delivers a light, Nordic look and is particularly well-suited for oak surfaces.

Contains : 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
Safety data sheet available on request.

VOC:

105 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Coverage:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Matt

Packaging:

5 L

It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before priming or lacquering. When priming, use WOCA Basic Pro Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

Primer and a coat of should be applied undiluted, using a brush or roller. Alternatively, two coats of lacquer can be applied. Leave the surface to dry until next day.

Sand the surface with and vacuum clean the surface thoroughly.

Apply the final coat of undiluted .

Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.

Products you need