Master RD-2K Lacquer

Item No.: 690140A 690141A

Excellent resistance and durability for public areas

Extreme strength and resistance
R9 anti slip resistance
Light Nordic look
Fire classification according to DIN EN 13501: Bfl-s1
Water-based

Colours

*The wood sample is shown on oak

Colourless – Matt

Colourless – Silk-matt

Packing

Certifications

Product Details

Master RD-2K Lacquer is a water-based, two-component lacquer with an isocyanate-free hardener, ideal for heavy-traffic areas like canteens and stairs. It provides strong protection, high slip resistance, and resists black heel marks, scratches, and stains. Clear and light-preserving, it is easy to apply and ensures a comfortable indoor environment.

Safety data sheet available on request.
Contains : 1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.

VOC:

90 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Matt

Packaging:

5 L

VOC:

85 g/l, maximum VOC content (A/e (WB)): 130 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-10 m²/L

Colour:

Colourless – Silk-matt

Packaging:

5 L

It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before priming. When priming, use WOCA Master Base Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Apply the primer. When dry, mix with the lacquer and shake thoroughly before use. Leave the mixture to stand for ten minutes before use, to allow the hardener to activate.

A coat of Lacquer should be applied undiluted, using a brush or roller. Leave the surface to dry until next day.

Sand the surface with and vacuum clean the surface thoroughly.

Apply the final coat of with hardener (freshly mixed).

Water and coloured fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.

Products you need

Master Pure 2K Hardener

Hardener for 2K lacquers

ERROR: ORA-00907: missing right parenthesis