Invisible Oil

Item No.: 525010SA 525025A

Wood floor oil with a neutral look

Gives the floor an untreated appearance
Resistant to liquids such as water, coffee, tea and red wine
Gives the wood a beautiful, breathable ‘soft feel’ surface
Indoor climate certified

Colours

*The wood sample is shown on oak

Natural

Packing

Certifications

Product Details

Invisible Oil is a water-based, low-odor, single-component oil of the highest quality. Combined with WOCA Invisible Oil Primer, it provides wood with a matte, natural appearance and strong, water-repellent protection that is easy to maintain. Ideal for machine oiling of light wood types and as the second phase of WOCA’s premium water-based oil system.

Danger!
Wear protective gloves/protective clothing/eye protection/face protection.
Safety data sheet available on request.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
The following applies only for colours that contains more than 1 % white pigment.
If exposed or concerned, get medical advice.

VOC:

90 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colour:

Natural

Packaging:

25 ML,2.5 L

VOC:

90 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colour:

Natural

Packaging:

25 ML,2.5 L

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Thoroughly shake the container of , both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.

Apply using a short-bristled paint roller in an even coat. Work in small areas of no more than at a time.

Leave the oil to be absorbed for . If the oil soaks quickly into the wood, apply more oil.

Rub the oil into the wood until the floor appears saturated. Use a buffing machine with a beige or bordeaux pad. Regularly change the buffing pad to prevent the oil from lumping.

Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.

The surface can be used with caution after and is fully hardened after at room temperature.

After 24 hours, the surface must be treated with Invisible Oil Care to improve the floor’s resistance to stains and wear. For optimal cleaning, we recommend WOCA Natural Soap Extra White, which cares for and maintains the surface. Do not expose the floor to water or other liquids for the first 7 days, while the oil is hardening.

Products you need