Maintenance Oil Diamond Active

Item number:

Revitalises oil-treated wood

  • Resistant to liquids such as water, coffee, tea and red wine
  • Resistant to scratches and marks
  • Gives the wood a beautiful, breathable surface
  • IBR-certified

*The wood sample is shown on oak

84.535 FL.OZ.

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet


Drying oils.


35 g/l. (max)


0.85-0.90 g/ml.

Shelf life:

3 years

Application Temperature:

+59-86°F and approx. 50% air humidity.


430-540 sq.ft./L


Natural, White

Cleaning of tools:

Use WOCA Solvent or turpentine


+50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.


84.535 FL.OZ.


15-20 Sec. DIN Cup 4


WOCA Solvent (does not normally need to be diluted).

Solid content:


Light use:

3-4 hours at 68°F

Drying time when machine polished:

3-4 hours at 68°F

Fully hard:

3 days at 68°F

Use Maintenance Oil Diamond Active for the ultimate care and maintenance of your oiled wood floor. This exclusive, low-odour, extremely tough maintenance oil is made from the absolute highest quality raw materials, to benefit both you and your oiled floor. In addition to being very easy to use and assuring minimal product waste, the maintenance oil refreshes the natural, warm glow of the wood and increases resistance to stains, via a unique hyper cross linking technology. Maintenance Oil Diamond Active is suitable for both manual and machine application to oiled floors.


Products in use
It is important that the product, the room and the floor are at a temperature between 59-86°F and that air humidity is approx. 50 %. Wood humidity must not exceed 12 %. Make sure that the room is well-ventilated for optimal evaporatio and drying time.The surface must be free of grime, grease and wax. Wash the floor with WOCA Intensive Wood Cleaner and leave the floor to dry for a least 8 hours or until it is completely dry.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply approx. 3.38 fl. oz of Maintenance Oil Diamond Active per 40 sq.ft./L floor using a pad, short-bristled paint roller (3-4 mm) or a polishing machine with a white or beige pad on slightly larger areas.
  3. Make sure that the oil is polished well into the wood. Continue polishing until the wood seems saturated and the surface has an even, uniform appearance.
  4. Remove excess oil with clean, lint-free cotton cloths, before proceeding to the next section. The surface should not appear wet and no excess oil should remain on the surface.
  5. Continue stepwise till the floor has been finished.
  6. Clean tools with WOCA Solvent or Turpentine.
  7. If the floor is polished with a buffing machine, it can be used with caution after 3-4 hours of drying time at 20°C. If polished manually, the floor can be used with caution after approximately 24 hours. Do not expose the floor to water or clean it for the first 3 days at 68°F, while the oil is hardening.
Do not expose the floor to water or clean it for the first 2 days, while the oil is hardening.