Diamond Oil Active

Item number:

Oiling of wood surfaces

  • 1-component oil with the performance of a 2-component oil
  • Easy application
  • Gives the wood a beautiful, breathable surface 
  • Extreme duarbility and resistance to scratches and marks 
  • Resistant to liquids such as water, coffee, tea and red wine

*The wood sample is shown on oak

0.845 FL.OZ.
8.454 FL.OZ
84.535 FL.OZ.

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

75 g/l, maximum VOC content (A/i (SB)): 500 g/l.

Density:

0.95-1.00 g/ml.

Shelf life:

3 years

Application Temperature:

+59-86°F and approx. 50% air humidity.

Coverage:

215-270 sq.ft./L

Colours:

Natural, Extra White, White, Concrete Grey, Sand Grey, Carbon Black, Chocolate Brown, Caramel Brown, Smoke Brown, Pure Wood

Cleaning of tools:

Use WOCA Solvent or turpentine

Storage:

+50-77°F. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

.025, .25, 84.535 FL.OZ.

Non-slip (DIN 51130):

R9

Viscosity:

40-45 Sec. DIN Cup 4

Dilution:

WOCA Solvent (does not normally need to be diluted).

Specific gravity:

0,90-0,95 g/ml.

Odour:

Faint

Solid content:

95-100%

Drying time:

24 hours at 68°F

Between coats:

8-10 hours at 68°F

Light use:

24 hours at 68°F

Recommendation:

Do not expose the floor to water or clean it for the first 7 days while the oil is hardening. After 7 days the floor can be cleaned with WOCA Natural Soap, which gives the surface extra protection.

Fully hard:

5 days at 68°F

Diamond Oil Active is for those who appreciate an incredibly high level of quality when oiling their wooden floors and furnitures. This exclusive, single-component, low-odour, extremely hard-wearing floor oil is made from the absolutely finest quality materials, is very easy to work with and assures minimal waste. Diamond Oil Active’s unique hyper cross linking technology will give your wooden floor a comfortable, non-slip surface that is extremely water repellent and easy to clean and maintain. The oil has a dry matter content of approx. 99% and is suitable for machine-application when oiling untreated, new or newly-sanded wooden floors in all species of wood.

Worksteps

Instructions
Products in use
The wood must be freshly-sanded with grit 100-120 for the final sanding. Product, room and floor temperature must be between 59-86°F. Ensure good ventilation when applying the oil and when it is drying. Wash the surface with WOCA Intensive Wood Cleaner. Leave the floor to dry for at least 8 hours before applying the oil.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Wash the floor with Intensive Wood Cleaner. Leave the floor to dry for at least 24 hours at 68°F before applying the oil.
  2. Thoroughly shake the container of Diamond Oil Active , both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch. Apply the oil using a short-bristled paint roller in an even coat.
  3. Leave the oil to be absorbed for 10-15 minutes. If the oil soaks quickly into the wood, apply more oil.
  4. Polish the oil into the wood until the surface appears saturated. Use a buffing machine with a buffing machine for large areas and a polishing cloth/pad manually for small areas.
  5. Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
  6. If an extra-attractive finish and resistance is desired, the floor can be repolished with Diamond Oil Active per 110 sq.ft./L within 8-9 hours hours of the first application. The oil should be polished thoroughly, as described in 4+5.
  7. The floor can be used with caution after 24 hours.
  8. Clean tools with WOCA Solvent or Turpentine.
If an extra-attractive finish and resistance is desired, the floor can be repolished with 1 dl Diamond Oil Active per 10 m² within 8-10 hours of the first application. The oil should be polished thoroughly, as previously described.