Neutral UV-Oil 2306

Item number:

Water-based UV-oil that maintains the unfinished look

  • Untreated appearance of the wood (invisible look) 
  • Ensures UV-oiled floors 
  • Fast production speeds

10 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

110 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Coverage:

30-40 m²/L

Colours:

Colourless

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

10 L

Viscosity:

50-55 Sec. DIN Cup 4

Solid content:

30-40%

Drying time:

Flash off: Water must be removed before exposing to UV-drying. First coat: Drying tunnel with max. 40°C and good air circulation, or room temperature min. 3 minutes. Drying: UV-drying with Hg lamps, min. 400-600 mJ/cm2 for each lamp. Production speed 10 m/min.

Fully hard:

Immediately after UV-drying

Neutral UV-Oil 2306 is a unique water-based UV-oil that provides the wood with a durable protection as well as maintains the untreated look of the wood. Using this oil ensures fast productions speeds.

Worksteps

Instructions
Products in use
The wood must be clean, dry and free from dust.


Sanding
  • Final sanding grit 150-180

Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply the product 25-30 gr/m2

Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise

Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Make sure water is evaporated before uv-drying

Uv-lamp
  • Use 2 lamps Mercury 400-600 mj/cm2

Intermediate sanding
  • Use sandingpaper grit 320-400

Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 10-15 gr/m2

Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise

Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Make sure water is evaporated before uv-drying

Uv-lamp
  • Use 2 lamps Mercury 800-1000 mj/cm2
Viscosity correction: The product can be diluted with a maximum of 5 % water.An extra coat of Uv-oil 510 can be applied giving extra protection