Invisible Oil Care

Item number:

Top coat and care for Invisible Oil

  • Cares for and maintains floors that have been treated with Invisible Oil Primer and Invisible Oil
  • Resistant to liquids such as water, coffee, tea and red wine
  • Gives the wood a beautiful, breathable soft feel surface

*The wood sample is shown on oak

1 L
100 ML
25 ML
750 ML

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

10 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

30-40 m²/L

Colours:

Natural

Cleaning of tools:

Use warm water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L

Viscosity:

25-30 Sec. DIN Cup 4

Dilution:

Undiluted

Odour:

Faint

Solid content:

10-20%

Drying time:

6-12 hours at 20°C

Fully hard:

5 days at 20°C

Invisible Oil Care is a water-based care product for the maintenance of surfaces that have been treated with WOCA Invisible Oil. This care product refreshes the oiled surface and increases the oil’s ability to resist stains and wear. Invisible Oil Care is part of a high quality water-based oiling system and should therefore be used together with WOCA Invisible Oil Primer and Invisible Oil. The Invisible system has been developed for use with light wood varieties, where a high oiling quality and newly-sanded, untreated appearance are required. The range gives the floor a surface that is both comfortable to walk on and soft to the touch. The floor is also left with a soft, water-resistant surface that is easy to clean and maintain.

Worksteps

Instructions
Products in use
It is important that the product, the room and the floor are at a temperature between 15 °C and 30 °C and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time. Clean the surface using WOCA Intensive Wood Cleaner and leave until completely dry.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Thoroughly shake the container, both before and during use.
  2. Apply Invisible Oil Care in a thin and even coat, using the WOCA Oil applicator or a wool pad and pad holder. Work in small areas of no more than 20 m² at a time.
  3. Carefully polish the area with a white pad. Use a polishing machine for larger surfaces. Continue polishing until the wood is completely saturated and the surface has a uniform appearance.
  4. Remove excess oil care with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.
  5. The surface can be used with caution after 6-12 hours and is fully hardened after 5 days at room temperature.
Do not expose the floor to water or other liquids for the first 5 days, while Invisible Oil Care is hardening. For optimal cleaning, we recommend WOCA Natural Soap Extra White, which cares for and maintains the surface.