UV Oil 508

Item number:

100 % UV oil for wooden floors that cures instantly

  • Fast production flow
  • Ensures UV-oiled floors that are ready for use
  • Endless number of colours
  • EN71-3 approved

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

European standard which specifies the requirements for sports floors and surfaces for indoor facilities, such as gloss, friction and reflectance.
1 L
5 L
10 L
Find retailer

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

VOC:

30 g/l, maximum VOC content (A/e (SB)): 400 g/l.

Density:

1.00-1.10 g/ml.

Shelf life:

2 years

Coverage:

40-50 m²/L

Colours:

Natural, White 22%, White 3%, Red, Yellow

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

10 L

Viscosity:

65-70 Sec. DIN Cup 4

Dilution:

Undiluted

Solid content:

95-100%

Drying time:

UV drying with Hg lamps, min. 600-800 mJ/cm2 for each lamp. Production speed 10 m/min. For pigmented systems, a combination of Gallium and Mercury lamps are preferred.

Fully hard:

Immediately after UV-drying

UV-Oil 508 is an extremely fast-drying 100 % UV oil that penetrate deeply into the wood, creating very durable wood floors. Using this oil ensures fast productions speeds as the proven UV technology dries and cures instantly and allows immediate packing at the end of the production line. The UV-oil is available as ready-to-use oils and can be tinted in various colours

Worksteps

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 150-180
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 15-20 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Can also use pads
Uv-lamp
  • Use 2 lamps Mercury 400-600 mj/cm2
  • Use 1 Galium lamp if oil is pigmented
Intermediate sanding
  • Use sandingpaper grit 400-500
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 5 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2
Viscosity correction: Correction can be made with WOCA Reactive thinner for 100 % UV-oil only, #822080-001.

Products you need

  • Cleaner for UV Products
    Cleaner for UV Products

    Cleans tools and machinery used for UV-oils

  • Matting paste for UV
    Treat
    Matting paste for UV Oil

    Create your own gloss level

Related products

View in same category
+1

UV Oil 508

100 % UV oil for wooden floors that cures instantly