Master Care

Item number:

For lacquered, vinyl/LVT and laminate floors

  • Care treatment to refresh floors
  • Extends the lifetime of the floor
  • Protects against wear and scratches
  • Easy to use
  • Indoor Climate labelled

*The wood sample is shown on oak

25 ML
1 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Triisobutylphosphate. Can trigger allergic reaction.

VOC:

30 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

60 m²/L

Colours:

Colourless

Cleaning of tools:

Use soap and water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L

Dilution:

Undiluted

Odour:

Faint

Solid content:

Under 10%

Mixing ratio:

Ready to use. Do not dilute.

Drying time:

1-2 hours at 20°C

Re-treatment:

2-4 times a year or when required.

Care for your vinyl floor, laminate floor or lacquered wood floor using Master Care. This care product smoothens small scratches, increases the resistance of the surface and provides effective protection against wear. This extends the lifetime of the surface or floor. Because Master Care does not build up a thick layer, you can use the product whenever it is required.

Worksteps

Instructions
Products in use
Wash the floor thoroughly with WOCA Intensive Wood Cleaner, until the surface is perfectly clean. Wash with clean water afterwards. Leave the floor to dry completely before application of Master Care.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. Apply the concentrated care product in a thin and even coat, using a WOCA Wool Pad and WOCA Pad Holder. If the cloth/mop becomes dirty, rinse in clean water and wring thoroughly. Then continue the application. Do not apply additional Master Care once a surface has begun to dry.
  3. Leave the floor to dry for 1-2 hours at 20°C. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.
  4. For regular cleaning of the treated surface, use Master Cleaner.
For best results, use WOCA Master Cleaner for regular cleaning of the treated surface.