Exterior Oil Refresher

Item number:

Refreshing wash-in oil for outdoor wood

  • 3 in 1 - cleans, oils and maintains
  • Retains the beautiful look of the wood
  • Increases the resistance of wood to wind and weather
  • Postpones re-oiling
  • Extends the lifetime of the wood
  • Leaves a protecting oil film on the wood

*The wood sample is shown on pressure impregnated pine

1 L
2.5 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

Less than 5%: non-ionic surfactants, IODOPROPYNYL BUTYLCARBAMATE, OCTYLISOTHIAZOLINONE.

Density:

0.90-0.95 g/ml.

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

80-100 m²/L

Colours:

Natural

Cleaning of tools:

Use soap and water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

2.5 L

Dilution:

Water

Odour:

Characteristic

Solid content:

10-20%

Mixing ratio:

1 dl Exterior Oil Refresher to 10 dl water

Drying time:

24 hours at 20°C

Re-treatment:

After 4-6 weeks, depending on weather and wear.

Exterior Oil Refresher is a mild oil soap for cleaning and care of outdoor oil-treated surfaces, such as wooden patios and garden furniture. Not only is Exterior Oil Refresher a non-harsh surface cleaner, but it also adds extra oil to the surface, penetrating the wood and providing additional protection for up to 6 weeks.

Worksteps

Instructions
Products in use
The surface must be free of grime, grease and growth. If the wood is very dirty, we recommend that the surface is cleaned with WOCA Exterior Wood Cleaner before it is treated with Exterior Oil Refresher.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Shake the container well before use.
  2. If the surface is very grimy, clean first with WOCA Exterior Wood Cleaner.
  3. Mix Exterior Oil Refresher with clean water in a mixture ratio of 80-100 m²/L.
  4. Apply the diluted Exterior Oil Refresher using a Gulvklude 50 x 55 cm (polérklud), soft brush or swabber and work the oil soap right into the wood.
  5. Leave the mixture to stand for 10 minutes before rinsing off excess Exterior Oil Refresher with clean water.
  6. Leave the surface to dry for 24 hours at 20°C before use.