Natural Soap

Item number:

Cleaning and protection of oiled wood

  • Nourishing effect on oiled and soaped surfaces
  • For regularly cleaning 
  • Ideal for floors, furniture, table tops and panels
  • Indoor climate certified
  • For the basic treatment of softwood

*The wood sample is shown on oak

25 ML
1 L
2.5 L
3 L
5 L

Product details

  • Description
  • Specifications
  • Technical data sheet
  • Safety data sheet

Declaration:

15% or over but less than 30% Soap. The following applies only for colours, less than 5%: colouring agents.

pH-value:

pH 9-10

Shelf life:

3 years

Application Temperature:

+15-30°C and approx. 50% air humidity.

Coverage:

320-400 m²/L

Colours:

Natural, White

Cleaning of tools:

Use water

Storage:

+10-25°C. Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer.

Packaging:

1 L, 2.5 L, 5 L

Viscosity:

20-25 Sec. DIN Cup 4

Dilution:

Water

Odour:

Odourless

Mixing ratio:

125 ml to 5 L water.

Drying time:

15-30 minutes at 20˚

Clean and maintain oiled, waxed and soaped wood surfaces with Natural Soap. This mild, penetrating soap removes dirt and helps prevent the wood from drying out and cracking. It leaves behind a microscopic, breathable soap layer on the surface that maximizes resistance and makes the surface easier to keep clean. Natural Soap is indoor climate labelled and free of perfume and additives.

Worksteps

Instructions
Products in use
Daily cleaning is made with vacuum cleaner or broom. The frequency of floor cleaning depends on the wear on the floor. Very dirty floors may be cleaned with WOCA Intensive Wood Cleaner before using Natural Soap.For basic treatment (soap saturation) of untreated or lye-treated softwood, 1 L soap to 10 L water is used. Wash the floor 3 times during the first 2 days with this mixing ratio. Let the surface dry.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  1. Natural Soap is shaken carefully before use. Make sure the pigments are mixed well.
  2. Mix 125 ml of Natural Soap with 5 L warm water.
  3. Wipe down the surface with a cotton cloth.
Use a mop/cloth containing cotton - don´t use 100% microfiber. For best results, use two buckets: one with soap water and the second with clean water to rinse the dirty mop.