UV Oil 510

Numer przedmiotu:

100 % UV-oil for wooden floors with low gloss and good penetration

  • Fast production speeds 
  • Ensures UV-oiled floors that are ready for use 
  • Low gloss 

10 L

Szczegóły Produktu

  • Opis
  • Specyfikacje
  • Karta danych technicznych
  • Karta charakterystyki

LZO:

20 g/l, maksymalnej zawartosci LZO (A/e (SB)): 400 g/l.

Gęstość:

1.10-1.20 g/ml.

Trwałość:

3 lata

Wydajność:

30-40 m²/L

Kolory:

Naturalny

Przechowywanie:

+10-25°C. Chronić przed dziećmi. Nie narażać na działanie wysokiej temperatury (np. promieniowania słonecznego). W zimie chronić przed mrozem. Latem przechowywać w chłodnym miejscu.

Opakowanie:

10 L

Lepkość:

40-45 Dru. DIN Cup 4

Zawartość suchej masy:

95-100%

Całkowite utwardzenie:

Natychmiast po suszeniu UV

UV-Oil 510 is a 100 % UV-oil that penetrate deeply into the wood, creating hard-wearing wood floors with low gloss. Using this oil ensures fast production speeds as the proven UV-technology dries and cures instantly and allows immediate packing at the end of the production line. Wooden floors finished with this oil do not require additional on-site treatment after installation.

Etapy pracy

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 10-15 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2
  • By pigmented oils please aslo use Galium lamp
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 5-10 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Optional
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2